DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

DSP56307 View Datasheet(PDF) - Motorola => Freescale

Part Name
Description
Manufacturer
DSP56307
Motorola
Motorola => Freescale Motorola
DSP56307 Datasheet PDF : 156 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Signals/Connections
Ground
GROUND
Table 1-3 Grounds
Ground
Name
Description
GNDP
PLL GroundÑGNDP is ground-dedicated for PLL use. The connection should be
provided with an extremely low-impedance path to ground. VCCP should be
bypassed to GNDP by a 0.47 µF capacitor located as close as possible to the chip
package.
GNDP1
GNDQ
GND A
GNDD
PLL Ground 1ÑGNDP1 is ground-dedicated for PLL use. The connection should be
provided with an extremely low-impedance path to ground.
Quiet GroundÑGNDQ is an isolated ground for the internal processing logic. This
connection must be tied externally to all other chip ground connections. The user
must provide adequate external decoupling capacitors.
Address Bus GroundÑGNDA is an isolated ground for sections of the address bus
I/O drivers. This connection must be tied externally to all other chip ground
connections. The user must provide adequate external decoupling capacitors. There
are four GNDA connections.
Data Bus GroundÑGNDD is an isolated ground for sections of the data bus I/O
drivers. This connection must be tied externally to all other chip ground
connections. The user must provide adequate external decoupling capacitors.
GNDC
GNDH
GNDS
Bus Control GroundÑGNDC is an isolated ground for the bus control I/O drivers.
This connection must be tied externally to all other chip ground connections. The
user must provide adequate external decoupling capacitors.
Host GroundÑGNDH is an isolated ground for the HI08 I/O drivers. This
connection must be tied externally to all other chip ground connections. The user
must provide adequate external decoupling capacitors.
ESSI, SCI, and Timer GroundÑGNDS is an isolated ground for the ESSI, SCI, and
timer I/O drivers. This connection must be tied externally to all other chip ground
connections. The user must provide adequate external decoupling capacitors.
Not Recommended for New Design
1-4
DSP56307 Technical Data
MOTOROLA

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]