DSP56100 View Datasheet(PDF) - Motorola => Freescale
Part Name
Description
Manufacturer
DSP56100 Datasheet PDF : 63 Pages
| |||
PORT B
OR
HOST
ADDRESS
GENERATION
UNIT
15
7+10
ON-CHIP
PERIPHERALS
HOST, RSSI0,
RSSI1, TIMER
GPI/O, CODEC
CODEC,
PORT C
AND/OR
RSSI0,
RSSI1,
TIMER
INTERNAL DATA
BUS SWITCH
AND BIT
MANIPULATION
UNIT
XAB1
XAB2
PAB
EXTERNAL
ADDRESS
BUS
SWITCH
ADDRESS
16
PROGRAM
MEMORY
PRAM PROM
256 x 16 8K x 16
DATA MEMORY
DATA DATA
RAM ROM
4Kx16 4Kx16
BUS
10
CONTROL
XDB
PDB
GDB
EXTERNAL
DATA BUS
SWITCH
16
DATA
EXTAL
SXFC
CLKO
CLOCK
AND PLL
OnCE
4
PROGRAM CONTROL UNIT
PROGRAM
ADDRESS
GENERATOR
PROGRAM
DECODE
CONTROLLER
PROGRAM
INTERRUPT
CONTROLLER
DATA ALU
16x16+40 - 40-BIT MAC
TWO 40-BIT ACCUMULATORS
RESET
MODA/IRQA
MODB/IRQB
MODC/IRQC
DSP56166ROM Block Diagram
16 BITS
In the USA:
For technical assistance call:
DSP Applications Helpline (512) 891-3230
For availability and literature call your local Motorola Sales Office or Authorized Distributor.
For free application software and information call the Dr. BuB electronic bulletin board:
9600/4800/2400/1200/300 baud
(512) 891-3771
(8 data bits, no parity, 1 stop)
In Europe, Japan and Asia Pacific
Contact your regional sales office or Motorola distributor.
Note: Since the on-chip XROM is only connected to the XAB1 address bus (see the block diagram above), the data located in this
ROM is only accessible by the first read of a single read instruction or the first read of a dual parallel read instruction.
Therefore, during development using the RAM based part, the data to be mapped in the on-chip XROM on the ROM based
part should not be accessed with a second read during a dual parallel read instruction.
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not
convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems
intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola
product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unau-
thorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims,
costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and M are
registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
Literature Distribution Centers:
USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Center; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141 Japan.
ASIA-PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbor Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T.,
Hong Kong.
MOTOROLA
Share Link: 