DSP56300FM View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

DSP56300FM

24-Bit Audio Digital Signal Processor

Freescale Semiconductor 

Power

2.2 Power

Table 2-2 Power Inputs

Power Name

Description

VCCP

VCCLQ (4)

VCCHQ (4)

VCCA (4)

VCCD (1)

VCCC (1)

VCCS (3)

PLL Power—VCCP is VCC dedicated for PLL use. The voltage should be well-regulated and the input should

be provided with an extremely low impedance path to the VCC power rail. There is one VCCP input.

Quiet Core (Low) Power—VCCLQ is an isolated power for the internal processing logic. This input must be

tied externally to all other chip power inputs. The user must provide adequate external decoupling

capacitors. There are four VCCLQ inputs.

Quiet External (High) Power—VCCHQ is a quiet power source for I/O lines. This input must be tied

externally to all other chip power inputs. The user must provide adequate decoupling capacitors. There are

four VCCHQ inputs.

Address Bus Power—VCCA is an isolated power for sections of the address bus

I/O drivers. This input must be tied externally to all other chip power inputs. The user must provide adequate

external decoupling capacitors. There are four VCCA inputs.

Data Bus Power—VCCD is an isolated power for sections of the data bus I/O drivers. This input must be

tied externally to all other chip power inputs. The user must provide adequate external decoupling

capacitors. There is one VCCD inputs.

Bus Control Power—VCCC is an isolated power for the bus control I/O drivers. This input must be tied

externally to all other chip power inputs. The user must provide adequate external decoupling capacitors.

There is one VCCC inputs.

SHI and ESAI —VCCS is an isolated power for the SHI and ESAI. This input must be tied externally to all

other chip power inputsL. The user must provide adequate external decoupling capacitors. There are three

VCCS inputs.

2.3 Ground

Table 2-3 Grounds

Ground Name

Description

GNDP

GNDQ (4)

GNDA (4)

GNDD (1)

PLL Ground—GNDP is ground-dedicated for PLL use. The connection should be provided with an

extremely low-impedance path to ground. VCCP should be bypassed to GNDP by a 0.47 μF capacitor

located as close as possible to the chip package. There is one GNDP connection.

Quiet Ground—GNDQ is an isolated ground for the internal processing logic. This connection must be tied

externally to all other chip ground connections. The user must provide adequate external decoupling

capacitors. There are four GNDQ connections.

Address Bus Ground—GNDA is an isolated ground for sections of the address bus I/O drivers. This

connection must be tied externally to all other chip ground connections. The user must provide adequate

external decoupling capacitors. There are four GNDA connections.

Data Bus Ground—GNDD is an isolated ground for sections of the data bus I/O drivers. This connection

must be tied externally to all other chip ground connections. The user must provide adequate external

decoupling capacitors. There is one GNDD connections.

DSP56364 Technical Data, Rev. 4.1

Freescale Semiconductor

2-3

Share Link: