EL2072CS View Datasheet(PDF) - Intersil

Part Name

Description

Manufacturer

EL2072CS

730MHz Closed Loop Buffer

Intersil 

Burn-In Circuit

EL2072

Printed Circuit Layout

As with any high-frequency device, good PCB layout is

necessary for optimum performance. This is especially

important for the EL2072, which has a typical bandwidth of

730MHz. Ground plane construction is a requirement, as is

good power-supply bypassing close to the package. A

closely-placed 0.01µF ceramic capacitor between each

supply pin and the ground plane is usually sufficient

decoupling.

Pins 2, 3, 6, and 7 should be connected to the ground-plane

to minimize capacitive feedthrough, and all input and output

traces should be laid out as transmission lines and

terminated as close to the EL2072 package as possible.

Increasing capacitance on the output of the EL2072 will add

phase shift, decreasing phase margin and increasing

frequency-response peaking. A small series resistor before

the capacitance decouples this effect, and should be used

for large capacitance values. Please refer to the graphs for

the appropriate resistor value to be used.

All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

6

Share Link: