LC65F1306A View Datasheet(PDF) - SANYO -> Panasonic
Part Name
Description
Manufacturer
LC65F1306A
SANYO -> Panasonic
LC65F1306A Datasheet PDF : 22 Pages
| |||
LC65F1306A Oscillator Options
LC65F1306A
Circuit type
Ceramic resonator
External clock (used
with the 2-pin RC
oscillator circuit)
Two-pin RC
External clock used with
the ceramic oscillator
option
Frequency
Divider option
(Cycle time)
VDD
range
Notes
400 kHz
1/1 (10µs)
3 to 5.5V
Can not be used with the divide-by-three
and divide-by-four options.
800 kHz
1/1 (5µs)
3 to 5.5V
1 MHz
1/1 (4µs)
3 to 5.5V
4 MHz
1/1 (1µs)
1/3 (3µs)
1/4 (4µs)
3 to 5.5V
3 to 5.5V
3 to 5.5V
384 k to 4330 kHz
1152 k to 4330 kHz
1536 k to 4330 kHz
1/1 (10.4 to 0.92µs)
1/3 (10.4 to 2.77µs)
1/4 (10.4 to 3.70µs)
3 to 5.5V
3 to 5.5V
3 to 5.5V
Use the no divider circuit option and the
recommended circuit constants. When using
other constants by necessity, use the frequency
and VDD range identical to the external clock
written above.
3 to 5.5V
External clock drive is not possible. To use external clock drive, select the 2-pin RC oscillator option.
Port C and D Output level Option During Reset
The Output level of the C and D ports at reset can be selected from the following two options in 4-bit unit.
Option
High level output at reset
Low level output at reset
Conditions and notes
Ports C and D in 4-bit unit
Ports C and D in 4-bit unit
Port Output Type
The I/O port type is open-drain output.
Option
Open-drain output
Circuit
Ports
Ports A, C, D, E and F
Watchdog Reset Option
This option allows the user to select how the PE1/WDR pin is to be used. It can be used as the normal port PE1, or used as the
watchdog reset pin WDR.
No.6829-10/22
Share Link: