HB28E016/D032/D064/B128MM2
line including 16-bit CRC. The data block shall indicate the mode ERASE (the ERASE
bit shall be the only bit set).
If the ERASE bit is not the only bit in the data field then the LOCK_UNLOCK_FAILED error bit will be
set in the status register and the erase request is rejected. If the command was accepted then ALL THE
CARD CONTENT WILL BE ERASED including the PWD and PWD_LEN register content and the
locked card will get unlocked. An attempt to force erase on an unlocked card will fail and
LOCK_UNLOCK_FAILED error bit will be set in the status register.
41