HCPL-T250 View Datasheet(PDF) - HP => Agilent Technologies
Part Name
Description
Manufacturer
HCPL-T250 Datasheet PDF : 7 Pages
| |||
1.5 Amp Output Current IGBT
Gate Drive Optocoupler
Technical Data
HCPL-T250
Features
• Input Threshold Current
(IFLH): 5 mA (Max.)
• Supply Current
(ICC): 11 mA (Max.)
• Supply Voltage
(VCC): 15-35 V
• Output Current
(IO): ± 0.5 A (Min.)
• Switching Time
(tPLH/tPHL): 0.5 µs (Max.)
• Isolation Voltage
(VISO): 3750 Vrms (Min.)
• UL 1577 Recognized:
File No. E55361
• CSA Approved
• IEC/EN/DIN EN 60747-5-2
Approved with VIORM = 630
Vpeak
• 8 kV/µs Minimum Common
Mode Rejection (CMR) at
Vcm = 1500 V
• Creepage Distance: 7.4 mm.
Clearance: 7.1 mm.
Applications
• IGBT/MOSFET Gate Drive
• AC/Brushless DC Motor
Drives
• Industrial Inverters
• Switch Mode Power
Supplies
Description
The HCPL-T250 contains GaAs
LED. The LED is optically
coupled to an integrated circuit
with a power output stage. This
optocoupler is ideally suited for
driving power IGBTs and
MOSFETs used in motor control
inverter applications. The high
operating voltage range of the
output stage provides the drive
voltages required by gate
controlled devices. The voltage
and current supplied by this
optocoupler makes it ideally
suited for directly driving IGBTs
with ratings up to 1200 V/25 A.
For IGBTs with higher ratings,
the HCPL-T250 can be used to
drive a discrete power stage
which drives the IGBT gate.
Functional Diagram
N/C 1
ANODE 2
CATHODE 3
N/C 4
SHIELD
8 VCC
Q1
7 VO
6 VO
Q2
5 VEE
Truth Table
LED Vout
ON
LOW
OFF
HIGH
Ordering Information
Specify Part Number followed by
Option Number.
Example:
HCPL-T250 #XXXX
No Option = Standard DIP Package, 50 per tube.
060 = IEC/EN/DIN EN 60747-5-2 VIORM = 630 Vpeak
Option, 50 per tube.
300 = Gull Wing Surface Mount Option, 50 per tube.
500 = Tape and Reel Packaging Option, 1000 per reel.
XXXE = Lead Free Option
Remarks: The notation “#” is used for existing products, while (new) products launched
since 15th July 2001 and lead free option will use “–”
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component
to prevent damage and/or degradation which may be induced by ESD.
Share Link: 