HLMP-EG08 View Datasheet(PDF) - HP => Agilent Technologies
Part Name
Description
Manufacturer
HLMP-EG08 Datasheet PDF : 12 Pages
| |||
7
Absolute Maximum Ratings at TA = 25°C
DC Forward Current[1,2,3] ............................................................ 50 mA
Peak Pulsed Forward Current[2,3] .............................................. 100 mA
Average Forward Current[3] ......................................................... 30 mA
Reverse Voltage (IR = 100 µA) ......................................................... 5 V
LED Junction Temperature .......................................................... 130°C
Operating Temperature .............................................. -40°C to +100°C
Storage Temperature .................................................. -40°C to +120°C
Dip/Drag Soldering Temperature ........................... 260°C for 6 seconds
Through-the-Wave Preheat Temperature ...................................... 145°C
Through-the-Wave Solder Temperature ................. 245°C for 3 seconds
[1.59 mm (0.060 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents
between 10 mA and 30 mA are recommended. For more information on recommended
drive conditions, please refer to HP Application Brief I-024 (5966-3087E).
3. Please contact your Hewlett-Packard sales representative about operating currents
below 10 mA.
Electrical/Optical Characteristics at TA = 25°C
Parameter
Symbol Min. Typ.
Forward Voltage
Amber (λd = 590 nm)
Orange (λd = 605 nm)
Red-Orange (λd = 615 nm)
Red (λd = 626 nm)
Reverse Voltage
Peak Wavelength:
Amber (λd = 590 nm)
Orange (λd = 605 nm)
Red-Orange (λd = 615 nm)
Red (λd = 626 nm)
Spectral Halfwidth
VF
VR
λPEAK
∆λ1/2
2.02
1.98
1.94
1.90
5
20
592
609
621
635
17
Max.
2.4
Speed of Response
τs
20
Capacitance
C
40
Thermal Resistance
RθJ-PIN
240
Luminous Efficacy[1]
Amber (λd = 590 nm)
480
Orange (λd = 605 nm)
ηv
370
Red-Orange (λd = 615 nm)
260
Red (λd = 626 nm)
150
Units
V
V
nm
nm
ns
pF
°C/W
lm/W
Test Conditions
IF = 20 mA
IF = 100 µA
Peak of Wavelength of
Spectral Distribution
at IF = 20 mA
Wavelength Width at
Spectral Distribution
1/2 Power Point at
IF = 20 mA
Exponential Time
Constant, e-t/τ s
VF = 0, f = 1 MHz
LED Junction-to-Cathode
Lead
Emitted Luminous
Power/Emitted Radiant
Power
Note:
1. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in
candelas and ηv is the luminous efficacy in lumens/watt.
Share Link: 