ICX282AQ View Datasheet(PDF) - Sony Semiconductor

Part Name

Description

Manufacturer

ICX282AQ

Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras

Sony Semiconductor 

ICX282AQ

Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras

Description

The ICX282AQ is a diagonal 11mm (Type 2/3)

interline CCD solid-state image sensor with a square

pixel array and 5.07M effective pixels. Frame readout

allows all pixels' signals to be output independently

within approximately 1/3.75 second. In addition, output

is possible using various addition and pulse elimination

methods. This chip features an electronic shutter with

variable charge-storage time. Adoption of a design

specially suited for frame readout ensures a saturation

signal level equivalent to that when using field readout.

High resolution and high color reproductively are

achieved through the use of R, G, B primary color

mosaic filters as the color filters. Further, high

sensitivity and low dark current are achieved through

the adoption of Super HAD CCD technology.

This chip is suitable for applications such as

electronic still cameras, PC input cameras, etc.

24 pin DIP (Plastic)

Features

• High horizontal and vertical resolution

• Supports 10 types of readout modes

Frame readout mode, 2× speed mode (1), 2× speed mode (2), 8× speed mode,

center scan mode (1), center scan mode (2), center scan mode (3),

center scan mode (4), AF mode (1), AF mode (2)

• Square pixel

• Horizontal drive frequency: 22.5MHz

• No voltage adjustments (reset gate and substrate bias are not adjusted.)

• R, G, B primary color mosaic filters on chip

• High sensitivity, low dark current, excellent anti-blooming characteristics

• Continuous variable-speed shutter

• Horizontal register, reset gate: 3.3V drive

• 24-pin high-precision plastic package

V

Pin 1

2

Device Structure

• Interline CCD image sensor

• Image size:

Diagonal 11mm (Type 2/3)

• Total number of pixels: 2658 (H) × 1970 (V) approx. 5.24M pixels

12

Pin 13

H

8

58

• Number of effective pixels: 2588 (H) × 1960 (V) approx. 5.07M pixels

• Number of active pixels: 2580 (H) × 1944 (V) approx. 5.02M pixels

• Number of recommended recording pixels:

2560 (H) × 1920 (V) approx. 4.92M pixels

Optical black position

(Top View)

• Chip size:

9.74mm (H) × 7.96mm (V)

• Unit cell size:

3.4µm (H) × 3.4µm (V)

• Optical black:

Horizontal (H) direction: Front 12 pixels, rear 58 pixels

Vertical (V) direction: Front 8 pixels, rear 2 pixels

• Number of dummy bits: Horizontal 28

Vertical 1 (even fields only)

• Substrate material:

Silicon

∗ Super HAD CCD is a registered trademark of Sony Corporation. Super HAD CCD is a CCD that drastically improves sensitivity by introducing

newly developed semiconductor technology by Sony Corporation into Sony's high-performance HAD (Hole-Accumulation Diode) sensor.

Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by

any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the

operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.

–1–

E00Z37A1Z-PS

Share Link: