ICX285 View Datasheet(PDF) - Sony Semiconductor

Part Name

Description

Manufacturer

ICX285

CCD Image Sensor with Square Pixel for Color Cameras / 20Pin Ceramic Package

Sony Semiconductor 

ICX285AQ

c) The adhesive may cause the marking on the rear surface to disappear, especially in case the regulated

voltage value is indicated on the rear surface. Therefore, the adhesive should not be applied to this

area, and indicated values should be transferred to other locations as a precaution.

d) The upper and lower ceramic are joined by low melting point glass. Therefore, care should be taken not

to perform the following actions as this may cause cracks.

• Applying repeated bending stress to the outer leads.

• Heating the outer leads for an extended period with a soldering iron.

• Rapidly cooling or heating the package.

• Applying any load or impact to a limited portion of the low melting point glass using tweezers or other

sharp tools.

• Prying at the upper or lower ceramic using the low melting point glass as a fulcrum. Note that the

same cautions also apply when removing soldered products from boards.

e) Acrylate anaerobic adhesives are generally used to attach CCD image sensors. In addition, cyanoacrylate

instantaneous adhesives are sometimes used jointly with acrylate anaerobic adhesives. (reference)

5) Others

a) Do not expose to strong light (sun rays) for long periods, as color filters will be discolored. When high

luminous objects are imaged with the exposure level controlled by the electronic iris, the luminance of

the image-plane may become excessive and discoloring of the color filter will possibly be accelerated.

In such a case, it is advisable that taking-lens with the automatic-iris and closing of the shutter during

the power-off mode should be properly arranged. For continuous using under cruel condition exceeding

the normal using condition, consult our company.

b) Exposure to high temperature or humidity will affect the characteristics. Accordingly avoid storage or

usage in such conditions.

c) This CCD image sensor has a device structure that is sensitive to near infrared light, so white spots

during the subsequent dark signal occur at a higher probability compared to CCD image sensors with

normal structures. Therefore, note that the white spot at dark signal specification cannot be guaranteed

when used after storage for long periods.

– 23 –

Share Link: