IRH9130
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Pre-Irradiation
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage -100
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
—
VGS(th)
Gate Threshold Voltage
-2.0
gfs
Forward Transconductance
2.5
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
Ciss
Input Capacitance
—
Coss
Output Capacitance
—
Crss
Reverse Transfer Capacitance
—
Typ Max Units
Test Conditions
—— V
VGS = 0V, ID = -1.0mA
-0.1 — V/°C Reference to 25°C, ID = -1.0mA
— 0.3
— 0.325
— -4.0
——
— -25
— -250
— -100
— 100
— 45
— 10
— 25
— 30
— 50
— 70
— 70
10 —
1200 —
300 —
74 —
Ω
V
S( )
µA
nA
nC
ns
VGS = -12V, ID = -7.0A ➃
VGS = -12V, ID = -11A
VDS = VGS, ID = -1.0mA
VDS > -15V, IDS = -7.0A ➃
VDS= -80V ,VGS=0V
VDS = -80V,
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS =-12V, ID = -11A
VDS = -50V
VDD =-50V, ID = -11A
VGS =-12V, RG = 7.5Ω
nH Measured from Drain lead (6mm /0.25in from
package) to Source lead (6mm /0.25in. from
Package) with Source wires internally
bonded from Source Pin to Drain Pad
VGS = 0V, VDS = -25V
pF
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) ➀
—
—
—
—
-11
-44
A
VSD Diode Forward Voltage
— — -3.0 V
Tj = 25°C, IS = -11A, VGS = 0V ➃
trr Reverse Recovery Time
— — 250 nS Tj = 25°C, IF = -11A, di/dt ≤ -100A/µs
QRR Reverse Recovery Charge
— — 0.84 µC
VDD ≤ -50V ➃
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJA
RthCS
Junction-to-Case
Junction-to-Ambient
Case-to-Sink
Min Typ Max Units
— — 1.67
— — 30
— 0.12 —
°C/W
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com