IS42S32400E, IS45S32400E
DC ELECTRICAL CHARACTERISTICS 1 (Recommended Operation Conditions unless otherwise noted.)
Symbol Parameter
Test Condition
Idd1 (1) Operating Current
One bank active, CL = 3, BL = 1,
tclk = tclk (min), trc = trc (min)
Idd2p
Precharge Standby Current CKE ≤ Vil (max), tck = 15ns
(In Power-Down Mode)
Idd2ps
Precharge Standby Current CKE ≤ Vil (max), CLK ≤ Vil (max)
(In Power-Down Mode)
Idd2n (2) Precharge Standby Current CS ≥ Vdd - 0.2V, CKE ≥ Vih (min)
Idd2ns
(In Non Power-Down Mode) tck = 15ns
Precharge Standby Current CS ≥ Vdd - 0.2V, CKE ≥ Vih (min) or
(In Non Power-Down Mode) CKE ≤ Vil (max), All inputs stable
Idd3n (2) Active Standby Current
CS ≥ Vdd - 0.2V, CKE ≥ Vih (min)
Idd3ns
(In Non Power-Down Mode) tck = 15ns
Active Standby Current
CS ≥ Vdd - 0.2V, CKE ≥ Vih (min) or
(In Non Power-Down Mode) CKE ≤ Vil (max), All inputs stable
Idd3p Active Standby Current
CKE ≤ Vil (max), tck = 15ns
(Power-Down Mode)
Idd3ps Active Standby Current
CKE ≤ Vil (max), CLK ≤ Vil (max)
(Power-Down Mode)
Idd4
Operating Current
All banks active, BL = 4, CL = 3,
tck = tck (min)
Idd5
Auto-Refresh Current
trc = trc (min), tclk = tclk (min)
Idd6
Self-Refresh Current
CKE ≤ 0.2V
-6
-7 -75E Unit
140 120 140
mA
2
2
2
mA
1
1
1
mA
25
25
25
mA
15
15
15
mA
30
30
30
mA
20
20
20
mA
2
2
2
mA
2
2
2
mA
180 130 180
mA
180 160 180
mA
2
2
2 mA
Notes:
1. Idd (max) is specified at the output open condition.
2. Input signals are changed one time during 30ns.
DC ELECTRICAL CHARACTERISTICS 2 (Recommended Operation Conditions unless otherwise noted.)
Symbol Parameter
Iil
Input Leakage Current
Iol
Output Leakage Current
Voh
Output High Voltage Level
Vol
Output Low Voltage Level
Test Condition
0V ≤ Vin ≤ Vdd, with pins other than
the tested pin at 0V
Output is disabled, 0V ≤ Vout ≤ Vdd,
Ioh = -2mA
Iol = 2mA
Min Max Unit
-10 10 µA
-10 10 µA
2.4
—
V
—
0.4
V
Integrated Silicon Solution, Inc. - www.issi.com
15
Rev. D
05/18/09