DS10004Z-2/TR View Datasheet(PDF) - Dallas Semiconductor -> Maxim Integrated
Part Name
Description
Manufacturer
DS10004Z-2/TR Datasheet PDF : 6 Pages
| |||
www.dalsemi.com
DS1004
5-Tap High Speed
Silicon Delay Line
FEATURES
All-silicon timing circuit
Five equally delayed clock phases per input
Precise tap-to-tap delay tolerances of ±0.5,
±0.75, or ±1 ns
Input-to-tap 1 delay of 5 ns
Delay tolerances of ±1.5 ns over temperature
and voltage
Leading and trailing edge precision preserves
the input symmetry
CMOS design with TTL compatibility
Standard 8-pin DIP and 150 mil 8-pin SOIC
Vapor phase, IR and wave solderable
Available in Tape and Reel
PIN ASSIGNMENT
IN 1
TAP 2 2
TAP 4 3
GND 4
8
VCC
7 TAP 1
6 TAP 3
5 TAP 5
DS1004M 8-Pin DIP (300-mil)
See Mech. Drawings Section
IN 1
TAP 2 2
8
VCC
7 TAP 1
TAP 4 3
GND 4
6 TAP 3
5 TAP 5
DS1004Z 8-Pin SOIC (150-mil)
See Mech. Drawings Section
PIN DESCRIPTION
TAP 1-5 - TAP Output Number
VCC
GND
- +5 Volt Supply
- Ground
IN
- Input
DESCRIPTION
The DS1004 is a 5-tap all silicon delay line which can provide 2, 3, 4, or 5 ns tap-to-tap delays within a
standard part family. The device is Dallas Semiconductor’s fastest 5-tap delay line. It is available in a
standard 8-pin DIP and 150 mil 8-pin mini-SOIC. The device features precise leading and trailing edge
accuracies and has the inherent reliability of an all-silicon delay line solution.
The DS1004 is specified for tap-to-tap tolerances as shown in Table 1. Each device has a minimum input-
to-tap 1 delay of 5 ns. Subsequent taps (taps 2 through 5) are precisely delayed by 2, 3, 4, or 5 ns. See
Table 1 for details. Tolerance over temperature and voltage is ±1.5 ns. Nominal tap-to-tap tolerances
range from ±0.5 ns to ±1.0 ns. Each output is capable of driving up to 10 LS loads.
For customers needing non-standard delay values, the Late Package Program (LPP) is available.
Customers may contact Dallas Semiconductor at (972) 371–4348 for further details.
1 of 6
111799
Share Link: 