LC83015E
The LC83015E has three voltage supply pins (VDD1 to
VDD3) and four ground pins (VSS1 to VSS4). The connec-
tions between these pins must conduct sufficiently to en-
sure that there are no voltage differences between each of
the voltage supply pins and each of the ground pins when
the device is powered-up. Connections similar to those
shown in figure 2 should be used.
Figure 3 shows the connection of a crystal oscilator to the
LC83015E Table 1 shows oscillator frequencies and capaci-
tances for a Nippon Denpa Kogyo NR-18 crystal oscillator.
Figure 3. Crystal oscillator connection
Table 1. Oscillator frequency selection
C1, C2 (pF)
18
12
10
12
8
6
Oscillator frequency (MHz)
12.288
16.9344
18.432
16.834
22.5792
24.576
Figure 2. Voltage supply and ground connection template
No.4013–11/13