LC864164 View Datasheet(PDF) - SANYO -> Panasonic

Part Name

Description

Manufacturer

LC864164

8-bit Single Chip Microcontroller

SANYO -> Panasonic 

LC86P4164

How to use

(1) Create a programming data for LC86P4164

Programming data for EPROM of the LC86P4164 is required.

Debugged evaluation file (EVA file) must be converted to an INTEL-HEX formatted file (HEX file) with file converter

program, SU86K.EXE. The HEX file is used as the programming data for the LC86P4164.

(2) How to program for the PROM

The LC86P4164 can be programmed by the EPROM programmer with attachment; W86EP4164D.

• Recommended EPROM programmer

Manufacturer

Advantest

Andou

AVAL

Minato electoronics

EPROM progammer

R4945, R4944

AF-9704

PKW-1100, PKW-3000

MODEL 1890A

• "27010 (Vpp=12.5V) Intel high speed programming" mode should be adopted. The address must be set to "0 to 13FFFH"

and a jumper (DASEC) must be set to 'OFF' at programming.

(3) How to use the data security function

"Data security" is the function to disable the EPROM data from being read out.

The following is the procedure in order to execute the data security function.

1. Set 'ON' the jumper of attachment.

2. Program again. Then the EPROM programmer displays an error. The error means that the data security functions

normally. It is not a trouble of the EPROM programmer or the LSI.

Notes

• Data security is not executed when the data of all address have 'FF' at the procedure 2 above.

• Data security cannot be executed by programming the sequential operation "BLANK=>PROGRAM=>VERIFY" at

procedure 2 above.

• Set the jumper to 'OFF' after executing the data security.

Data security

Data security OFF

Jumper

pin 1

Jumper

W86EP4164D

No. 5550-3/20

Share Link: