LPC1764 View Datasheet(PDF) - Philips Electronics

Part Name

Description

Manufacturer

LPC1764

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 64 kB SRAM with Ethernet, USB 2.0 Host/Device/OTG, CAN

Philips Electronics 

NXP Semiconductors

LPC1769/68/67/66/65/64

32-bit ARM Cortex-M3 microcontroller

17. Revision history

Table 19. Revision history

Document ID

LPC1769_68_67_66_65_64_4

Modifications:

LPC1768_67_66_65_64_3

Modifications:

LPC1768_66_65_64_2

LPC1768_66_65_64_1

Release date Data sheet status

Change notice Supersedes

20100201 Product data sheet

LPC1768_67_66_65_64_3

• ADC static characteristics: Parameter Rvsi and Figure 22 added.

• Table note 14 in Table 6 updated.

• In Table 6, move parameter Vhys from typical to minimum.

• Added part LPC1769.

• Added output pin parameters tr and tf (Section 11.4).

• Added SRAM sizes for CPU SRAM, AHB SRAM0, and AHB SRAM1 in Table 2.

• Added table note for XTAL1 and XTAL2 pins in Table 3.

• Changed minimum value of parameters Vi(XTAL1), Vi(XTAL2), Vi(RTCX1), and Vi(RTCX2) to

−0.5 V.

20091119 Product data sheet

-

LPC1768_66_65_64_2

• Changed data sheet status to Product data sheet.

• Added part LPC1767.

• Maximum data bit rate for SPI, SSP, UART added.

• RTC backup RAM size updated (20 bytes).

• WDT clock source added: RTC oscillator.

• Table 15 “Dynamic characteristics of SPI pins” updated.

• ADC conversion rate changed to 200 kHz.

• Updated motor control PWM pin names in Table 3 “Pin description” and Figure 1

“Block diagram”.

• VDDA and VREFP pin descriptions updated (Table 3).

• VESD changed to ±4000 V (Table 4).

• Power consumption data added to Table 6.

• Flash characteristics table updated (Table 7).

• I2C-bus timing characteristics updated (Table 11).

• I2S-bus timing characteristics updated (Table 12).

• Added Section 10.1 “Electrical pin characteristics”.

• Changed VI to 5.5 V (max) in Table 4.

• Changed VI to 5.0 V (max) in Table 6.

• Table 16 “ADC characteristics” updated.

• DAC electrical characteristics updated (Table 17).

• Section 14.2 “XTAL1 input” and Section 14.3 “XTAL and RTCX Printed Circuit Board

(PCB) layout guidelines”) added.

• Removed symbols from timing diagram (Figure 12).

• Updated Figure 3 “LPC17xx memory map”.

20090211 Objective data sheet

-

LPC1768_66_65_64_1

20090115 Objective data sheet

-

-

LPC1769_68_67_66_65_64_4

Product data sheet

Rev. 04 — 1 February 2010

© NXP B.V. 2010. All rights reserved.

62 of 66

Share Link: