LPC1776FET180(2011) View Datasheet(PDF) - NXP Semiconductors.

Part Name

Description

Manufacturer

LPC1776FET180
(Rev.:2011)

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM; USB Device/Host/OTG; Ethernet; LCD; EMC

NXP Semiconductors. 

NXP Semiconductors

LPC178x/7x

32-bit ARM Cortex-M3 microcontroller

Table 3. Pin description …continued

Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, DAC pins) and Table 7 (EMC

pins).

Symbol

Description

P0[22]

P0[23]

P0[24]

P0[25]

P0[26]

P0[27]

116 N17 L14 80 [6] I; I/O

PU O

I/O

O

O

18 H1 F5 13 [5] I; I/O

PU I

I/O

I

16 G2 E1 11 [5] I; I/O

PU I

I/O

I

14 F1 E4 10 [5] I; I/O

PU I

I/O

12 E1 D1 8

O

[7] I; I/O

PU I

O

I

50 T1 L3 35 [8] <tb I/O

d> I/O

I/O

P0[22] — General purpose digital input/output pin.

U1_RTS — Request to Send output for UART1. Can also be

configured to be an RS-485/EIA-485 output enable signal for

UART1.

SD_DAT[0] — Data line 0 for SD card interface.

U4_TXD — Transmitter output for USART4 (input/output in

smart card mode).

CAN_TD1 — CAN1 transmitter output.

P0[23] — General purpose digital input/output pin.

ADC0_IN[0] — A/D converter 0, input 0. When configured as an

ADC input, the digital function of the pin must be disabled.

I2S_RX_SCK — Receive Clock. It is driven by the master and

received by the slave. Corresponds to the signal SCK in the

I2S-bus specification.

T3_CAP0 — Capture input for Timer 3, channel 0.

P0[24] — General purpose digital input/output pin.

ADC0_IN[1] — A/D converter 0, input 1. When configured as an

ADC input, the digital function of the pin must be disabled.

I2S_RX_WS — Receive Word Select. It is driven by the master

and received by the slave. Corresponds to the signal WS in the

I2S-bus specification.

T3_CAP1 — Capture input for Timer 3, channel 1.

P0[25] — General purpose digital input/output pin.

ADC0_IN[2] — A/D converter 0, input 2. When configured as an

ADC input, the digital function of the pin must be disabled.

I2S_RX_SDA — Receive data. It is driven by the transmitter

and read by the receiver. Corresponds to the signal SD in the

I2S-bus specification.

U3_TXD — Transmitter output for UART3.

P0[26] — General purpose digital input/output pin.

ADC0_IN[3] — A/D converter 0, input 3. When configured as an

ADC input, the digital function of the pin must be disabled.

DAC_OUT — D/A converter output. When configured as the

DAC output, the digital function of the pin must be disabled.

U3_RXD — Receiver input for UART3.

P0[27] — General purpose digital input/output pin.

I2C0_SDA — I2C0 data input/output. (this pin uses a

specialized I2C pad).

USB_SDA1 — I2C serial data for communication with an

external USB transceiver.

LPC178X_7X

Objective data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 2 — 27 May 2011

© NXP B.V. 2011. All rights reserved.

15 of 117

Share Link: