LR38575 View Datasheet(PDF) - Sharp Electronics
Part Name
Description
Manufacturer
LR38575 Datasheet PDF : 9 Pages
| |||
LR38575
PIN DESCRIPTION
PIN NO. SYMBOL IO SYMBOL POLARITY
PIN NAME
DESCRIPTION
1 OFDC
O3
Control pulse output
A pulse to control OFD voltage.
for OFD voltage
2 V1X
O3
Vertical transfer
pulse output 1
A vertical transfer pulse for the CCD.
Connect to V1X pin of vertical driver IC.
3 VH1AX
O3
Readout pulse
output 1A
A pulse that transfers the charge of the photo-diode to
the vertical shift register.
Connect to VH1AX pin of vertical driver IC.
4 VH1BX
O3
Readout pulse
output 1B
A pulse that transfers the charge of the photo-diode to
the vertical shift register.
Connect to VH1BX pin of vertical driver IC.
5 V2X
O3
Vertical transfer
pulse output 2
A vertical transfer pulse for the CCD.
Connect to V2X pin of vertical driver IC.
6 VDD3
–
– Power supply
Supply of +3.3 V power.
7 GND
–
– Ground
A grounding pin.
8 V3X
O3
Vertical transfer
pulse output 3
A vertical transfer pulse for the CCD.
Connect to V3X pin of vertical driver IC.
9 VH3AX
O3
Readout pulse
output 3A
A pulse that transfers the charge of the photo-diode to
the vertical shift register.
Connect to VH3AX pin of vertical driver IC.
10 VH3BX
O3
Readout pulse
output 3B
A pulse that transfers the charge of the photo-diode to
the vertical shift register.
Connect to VH3BX pin of vertical driver IC.
11 V4X
O3
Vertical transfer
pulse output 4
A vertical transfer pulse for the CCD.
Connect to V4X pin of vertical driver IC.
A pulse that sweeps the charge of the photo-diode for
12 OFDX
O3
OFD pulse output
the electronic shutter. Connect to OFD pin of the CCD
through the vertical driver IC and DC offset circuit.
Held at H level in normal mode.
A pulse for pre-blanking. This pulse is controlled by
serial data BLKCNT.
BLKCNT = H; This pulse stays low during the
13 PBLK
O3
Pre-blanking pulse
output
absence of effective pixels within the
vertical blanking or during the
sweepout signal.
BLKCNT = L; This pulse stays high during the
sweepout signal.
The output phase of PBLK is selected by serial data.
3
Share Link: 