STLM20W87F View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
STLM20W87F Datasheet PDF : 17 Pages
| |||
STLM20
5
Capacitive load
Capacitive load
The STLM20 will handle capacitive loads of up to 300pF. Over the specified temperature
range, the STLM20 has a maximum output impedance of 160Ω.
In a noisy environment, it may be advisable to add some filtering to minimize noise in the
output voltage. A 0.1µF capacitor added between the supply voltage and ground is
recommended.
In an extremely noisy environment, it may be necessary to add a low-pass filter network to
the output of the device. A 1µF capacitor, in addition to the output impedance of the device,
and a 200Ω series resistor, will provide a low-pass filter that will pass the slow thermal time
constant of the STLM20, while filtering the higher frequency noise.
Figure 3. Filter network for noisy environments or capacitive loads > 300pF
0.1µF
Bypass Capacitor
0.1µF
Bypass Capacitor
CFILTER
RFILTER
GND VCC
VOUT
CL
AI12259
CFILTER
GND VCC
VOUT
RFILTER
CL
AI12260
Table 7.
Resistor/capacitor combinations for the filter network
RFILTER
CFILTER
200Ω
1µF
470Ω
0.1µF
680Ω
0.01µF
1000Ω
1000pF
10kΩ
100pF
100kΩ
10pF
11/17
Share Link: 