MB89560H View Datasheet(PDF) - Fujitsu
Part Name
Description
Manufacturer
MB89560H Datasheet PDF : 52 Pages
| |||
MB89560H Series
s PIN DESCRIPTION
Pin no.
LQFP*1 MQFP*3
LQFP*2 QFP*4
43
45
44
46
Pin name
X0
X1
I/O circuit
type
Function
Crystal or other resonator connector pins for the main clock.
A
The external clock can be connected to X0. When this is done,
be sure to leave X1 open.
CR oscillation selectability in model with a mask ROM only.
42
44
MODA
Memory access mode setting pins.
C
Connect directly to VSS.
Hysteresis input type.
39
41
RST
Reset I/O pin
This pin is a CMOS output type with a pull-up resistor, and a
D
hysteresis input type.
“L” is output from this pin by an internal reset request (optional).
The internal circuit is initialized by the input of “L”.
49 to 52
51 to 54
P24/INT20 to
P27/INT23
General-purpose CMOS I/O ports
E
Also serve as an external interrupt 2 input (wake-up function).
External interrupt 2 input is hysteresis input.
Selectable pull-up resistor.
30 to 36 32 to P10/INT10 to
,38
38,40 P17/INT17
General-purpose CMOS I/O ports
E
Also serve as input for external interrupt 1 input.
External interrupt 1 input is hysteresis input.
Selectable pull-up resistor.
General-purpose CMOS I/O ports
60
62
P44/UCK/
SCK1
Also serve as the clock I/O for the High-speed UART and
E
Serial IO.
The peripheral is a hysteresis input type.
Selectable pull-up resistor.
General-purpose CMOS I/O ports
Also serves as the data output for the High-speed UART and
61
63 P45/UO/SO1
F
Serial I/O.
The peripheral is a hysteresis input type.
Selectable pull-up resistor.
N-ch open drain general-purpose I/O ports
62
64
P46/UI/SI1
G
Also serves as the data input for the High-speed UART and
Serial I/O.
The peripheral is a hysteresis input type.
N-ch open drain general-purpose I/O port
63
65
P47/PWC
G
Also serve as the external clock input for PWC.
The peripheral is a hysteresis input.
56
58
P40/WTO/
TO11
General-purpose CMOS I/O port
F
Also serves as an 8/16-bit timer/counter output and PWC output.
*1: FPT-80P-M05
*2: FPT-80P-M11
*3: MQP-80C-P01
*4: FPT-80P-M06
8
(Continued)
Share Link: 