MB91106 View Datasheet(PDF) - Fujitsu

Part Name

Description

Manufacturer

MB91106

32-bit RISC Microcontroller

Fujitsu 

MB91106 Series

Pin no.

LQFP*1 QFP*2

84

87

Pin name

DACK1

PE7

76

79 SI0

TRG0

PF0

77

80 SO0

TRG1

PF1

78

81 SC0

OCPA3

PF2

79

82 SI1

TRG2

PF3

*1: FPT-100P-M05

*2: FPT-100P-M06

10

Circuit

type

Function

E External transfer request acknowledge output pin for DMAC

(ch. 1)

This function is available when transfer request output for

DMAC is enabled.

Can be configured as general purpose I/O port when DACK1 is

not used.

This function is available when transfer request output for

DMAC or DACK1 output is disabled.

E UART0 data input pin

This pin is used for input during UART0 is in input operation,

and it is necessary to disable output for other functions from

this pin unless such output is made intentionally.

PWM timer external trigger input pin (ch.0)

This pin is used for input during PWM timer external trigger is

in input operation, and it is necessary to disable output for

other functions from this pin unless such output is made

intentionally.

Can be configured as general purpose I/O port when SI0 and

TRG0 are not used.

E UART0 data output pin

This function is available when UART0 data output is enabled.

PWM timer external trigger input pin

This function is available when serial data output of PF1,

UART0 are disabled.

Can be configured as general purpose I/O port when SO0 and

TRG1 are not used.

This function is available when serial data output of UART0 is

disabled.

E UART0 clock I/O pin

Clock output is available when UART0 clock output is enabled.

PWM timer output pin

This function is available when PWM timer output is enabled.

Can be configured as general purpose I/O port when SC0 and

OCPA3 are not used.

This function is available when UART0 clock output is disabled.

E UART1 data input pin

This pin is used for input during UART1 is in input operation,

and it is necessary to disable output for other functions from

this pin unless such output is made intentionally.

PWM timer external trigger input pin

This pin is used for input during PWM timer external trigger is

in input operation, and it is necessary to disable output for

other functions from this pin unless such output is made

intentionally.

Can be configured as general purpose I/O port when SI1 and

TRG2 are not used.

(Continued)

Share Link: