MB95116A View Datasheet(PDF) - Fujitsu

Part Name

Description

Manufacturer

MB95116A

8-bit Proprietary Microcontrollers

Fujitsu 

MB95110A Series

■ PRODUCT LINEUP

Part number

Parameter

MB95116A

MB95F118AS

MB95F118AW MB95FV100A-101

Type

MASK product

FLASH product

EVA product

ROM capacity

32 Kbytes

60 Kbytes

RAM capacity

1 Kbytes

2 Kbytes

3.75 Kbytes

Reset output

No

Option

Selectable

single/dual

-system*2

Single-system

Dual-system

Selectable

single/dual

-system*1

CPU functions

Number of basic instructions

Instruction bit length

Instruction length

Data bit length

Minimum instruction execution time

Interrupt processing time

: 136

: 8 bits

: 1 to 3 bytes

: 1, 8, and 16 bits

: 0.1 µs (at internal 10 MHz)

: 0.9 µs (at internal 10 MHz)

Ports

(Max 40 ports)

General-purpose I/O port (Nch open drain) : 2 ports

General-purpose I/O port (CMOS)

: 38 ports

Timebase timer

Interrupt cycle : 0.5 ms, 2.05 ms, 8.2 ms, 32.8 ms (at main oscillation clock 4 MHz)

Watchdog timer

Reset generated cycle

At main oscillation clock 10 MHz

: Minimum 105 ms

At sub oscillation clock 32.768 kHz (for dual clock product) : Minimum 250 ms

Wild register

Capable of replacing 3 bytes of data

I2C bus

Master/slave sending and receiving

Bus error function and arbitration function

Detecting transmitting direction function

Start condition repeated generation and detection functions

Built-in wake-up function

UART/SIO

Data transfer capable in UART/SIO

Full duplex double buffer, variable data length (5/6/7/8-bit), built-in baud rate generator

Transfer rate : 2400 bps to 125000 bps (at machine clock 10 MHz)

NRZ type transfer format, error detected function

LSB-first or MSB-first can be selected.

Clock synchronous (SIO) or clock asynchronous (UART) data transfer capable

LIN-UART

Dedicated reload timer allowing a wide range of communication speeds to be set.

Capable of data transfer synchronous or asynchronous to clock signal.

LIN functions available as the LIN master or LIN slave.

A/D converter

(8 channels)

8/16-bit

compound timer

(2 channels)

8-bit or 10-bit resolution can be selected.

Each channel of the timer can be used as “8-bit timer × 2 channels” or “16-bit timer ×

1 channel”.

Built-in timer function, PWC function, PWM function, capture function and square

waveform output

Count clock : 7 internal clocks and external clock can be selected.

(Continued)

3

Share Link: