MB95116BPV2(2008) View Datasheet(PDF) - Fujitsu

Part Name

Description

Manufacturer

MB95116BPV2
(Rev.:2008)

8-bit Proprietary Microcontrollers

Fujitsu 

MB95110B Series

(Continued)

Part number

Parameter

MB95116B

MB95F118BS

MB95F118BW

8/16-bit

compound timer

(2 channels)

Each channel of the timer can be used as “8-bit timer × 2 channels” or “16-bit timer

× 1 channel”.

Built-in timer function, PWC function, PWM function, capture function and square

wave form output

Count clock : 7 internal clocks and external clock can be selected.

16-bit PPG

PWM mode or one-shot mode can be selected.

Counter operating clock : 8 selectable clock sources

Support for external trigger start

8/16-bit PPG

(2 channels)

Each channel of the PPG can be used as “8-bit PPG × 2 channels” or “16-bit PPG

× 1 channel”.

Counter operating clock : Eight selectable clock sources

Watch counter

(for dual clock product)

Count clock : Four selectable clock sources (125ms, 250ms, 500ms, or 1s)

Counter value can be set from 0 to 63. (Capable of counting for 1 minute when

selecting clock source 1 second and setting counter value to 60)

Watch prescaler

(for dual clock product)

4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)

External interrupt

(8 channels)

Interrupt by edge detection (rising, falling, or both edges can be selected)

Can be used to recover from standby modes.

Flash memory

Supports automatic programming, Embedded AlgorithmTM *3

Write/Erase/Erase-Suspend/Resume commands

A flag indicating completion of the algorithm

Number of write/erase cycles (Minimum) : 10000 times

Data retention time : 20 years

Boot block configuration

Erase can be performed on each block

Block protection with external programming voltage

Flash Security Feature for protecting the content of the Flash

Standby mode

Sleep, stop, watch (for dual clock product) , and time-base timer

*1 : For details of option, refer to “■ MASK OPTIONS”.

*2 : Specify clock mode when ordering MASK ROM.

*3 : Embedded Algorithm is a trade mark of Advanced Micro Devices Inc.

Note : Part number of the evaluation products in MB95110B series is MB95FV100D-101. When using it, the MCU

board (MB2146-301A) is required.

4

Share Link: