MBM29F160BE View Datasheet(PDF) - Fujitsu
Part Name
Description
Manufacturer
MBM29F160BE Datasheet PDF : 53 Pages
| |||
MBM29F160TE-55/-70/-90/MBM29F160BE-55/-70/-90
s FEATURES
• 0.23 µm Process Technology
• Single 5.0 V read, program and erase
Minimizes system level power requirements
• Compatible with JEDEC-standard commands
Uses same software commands as E2PROMs
• Compatible with JEDEC-standard world-wide pinouts
48-pin TSOP (I) (Package suffix: TN-Normal Bend Type, TR-Reversed Bend Type)
• Minimum 100,000 program/erase cycles
• High performance
55 ns maximum access time
• Sector erase architecture
One 8K word, two 4K words, one 16K word, and thirty-one 32K words sectors in word mode
One 16K byte, two 8K bytes, one 32K byte, and thirty-one 64K bytes sectors in byte mode
Any combination of sectors can be concurrently erased. Also supports full chip erase
• Boot Code Sector Architecture
T = Top sector
B = Bottom sector
• Embedded Erase Algorithms
Automatically pre-programs and erases the chip or any sector
• Embedded Program Algorithms
Automatically programs and verifies data at specified address
• Data Polling and Toggle Bit feature for detection of program or erase cycle completion
• Ready/Busy output (RY/BY)
Hardware method for detection of program or erase cycle completion
• Low VCC write inhibit ≤ 4.2 V
• Erase Suspend/Resume
Suspends the erase operation to allow a read data and/or program in another sector within the same devic
• Hardware RESET pin
Resets internal state machine to the read mode
• Sector protection
Hardware method disables any combination of sectors from program or erase operations
• Temporary sector unprotection
Temporary sector unprotection via the RESET pin
• In accordance with CFI (Common Flash Memory Interface)
• WP Input pin (Hardware Protect)
At VIL, allows protection of boot sectors, regardless of sector protection/unprotection status
At VIH, allows removal of boot sector protection
At open, allows removal of boot sector protection (MBM29F160TE/BE)
3
Share Link: 