DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MC100EP016FA(2002) View Datasheet(PDF) - ON Semiconductor

Part Name
Description
Manufacturer
MC100EP016FA
(Rev.:2002)
ON-Semiconductor
ON Semiconductor ON-Semiconductor
MC100EP016FA Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MC10EP016, MC100EP016
3.3V / 5VĄECL 8-Bit
Synchronous Binary
Up Counter
The MC10/100EP016 is a high–speed synchronous, presettable,
cascadeable 8–bit binary counter. Architecture and operation are the
same as the MC10E016 in the ECLinPSfamily.
The counter features internal feedback to TC gated by the TCLD
(Terminal Count Load) pin. When TCLD is LOW (or left open, in
which case it is pulled LOW by the internal pulldowns), the TC
feedback is disabled, and counting proceeds continuously, with TC
going LOW to indicate an all–one state. When TCLD is HIGH, the TC
feedback causes the counter to automatically reload upon TC = LOW,
thus functioning as a programmable counter. The Qn outputs do not
need to be terminated for the count function to operate properly. To
minimize noise and power, unused Q outputs should be left
unterminated.
COUT and COUT provide differential outputs from a single,
non–cascaded counter or divider application. COUT and COUT
should not be used in cascade configuration. Only TC should be used
for a counter or divider cascade chain output.
A differential clock input has also been added to improve
performance.
The 100 Series contains temperature compensation.
500 ps Typical Propagation Delay
PECL Mode Operating Range: VCC = 3.0 V to 5.5 V
with VEE = 0 V
NECL Mode Operating Range: VCC = 0 V
with VEE = –3.0 V to –5.5 V
Open Input Default State
Safety Clamp on Inputs
Internal TC Feedback (Gated)
Addition of COUT and COUT
8–Bit
Differential Clock Input
VBB Output
Fully Synchronous Counting and TC Generation
Asynchronous Master Reset
http://onsemi.com
MARKING
DIAGRAM*
LQFP–32
FA SUFFIX
CASE 873A
MCxxx
EP016
AWLYYWW
32
1
xxx = 10 OR 100
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
*For additional information, see Application Note
AND8002/D
ORDERING INFORMATION
Device
Package Shipping
MC10EP016FA
LQFP–32 250 Units/Tray
MC10EP016FAR2 LQFP–32 2000 Tape & Reel
MC100EP016FA LQFP–32 250 Units/Tray
MC100EP016FAR2 LQFP–32 2000 Tape & Reel
© Semiconductor Components Industries, LLC, 2002
1
September, 2002 – Rev. 10
Publication Order Number:
MC10EP016/D

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]