M5206EAN View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

M5206EAN

ColdFire® Microprocessor

Freescale Semiconductor 

MCF5206e Overview

Freescale Semiconductor, Inc.

— Master or slave modes supporting multiple masters

— Automatic interrupt generation with programmable level

• System interface

— Glueless bus interface to 8 bit, 16 bit, and 32 bit DRAM, SRAM, ROM, and I/O devices

— Eight programmable chip selects and programmable wait states and port sizes allowing

external bus masters to access chip selects

— Programmable external interrupts

— 8-bit general-purpose I/O interface

— System protection

– 16-bit software watchdog timer with prescaler

– Double bus fault monitor

– Bus timeout monitor

– Spurious interrupt monitor

– Programmable interrupt controller (low interrupt latency, 3 external interrupt inputs, and

programmable interrupt priority and autovector generator)

— IEEE 1149.1 test (JTAG) support

• System debug interface

— Real-time trace

— Background debug mode (BDM)

• Fully static 3.3-volt operation with 5-volt tolerant inputs

• 160-pin QFP package; pin-compatible with MCF5206

1.1.2 ColdFire Version 2 Core

The ColdFire processor core consists of two independent, decoupled pipeline structures that maximize

performance while minimizing core size. The instruction fetch pipeline (IFP) is a two-stage pipeline for

prefetching instructions. The prefetched instruction stream is then gated into the two-stage operand

execution pipeline (OEP), which decodes the instruction, fetches the required operands and then executes

the required function. The IFP and OEP pipelines are decoupled by an instruction buffer that serves as a

FIFO queue, the IFP can prefetch instructions in advance of their actual use by the OEP, thereby minimizing

time stalled waiting for instructions. The OEP is implemented in a two-stage pipeline featuring a traditional

RISC datapath with a dual-read-ported register file feeding an arithmetic/logic unit.

1.1.3 Instruction Cache

The instruction cache improves system performance by providing cached instructions to the execution unit

in a single clock. The MCF5206e processor uses a 4-Kbyte, direct-mapped instruction cache to achieve 50

MIPS at 54 MHz. The cache is accessed by physical addresses, where each 16-byte line consists of an

address tag and a valid bit. The instruction cache also includes a bursting interface for 32-bit, 16-bit, and

8-bit port sizes to fill cache lines quickly.

4

MCF5206e Integrated ColdFire® Microprocessor Product Brief

MOTOROLA

For More Information On This Product,

Go to: www.freescale.com

Share Link: