MCP3301
ELECTRICAL SPECIFICATIONS (CONTINUED)
Electrical Characteristics: Unless otherwise noted, all parameters apply at VDD = 5V, VSS = 0V, and VREF = 5V. Full differential
input configuration (Figure 1-5) with fixed common mode voltage of 2.5V. All parameters apply over temperature with
TAMB = -40°C to +85°C (Note 7). Conversion speed (FSAMPLE) is 100 ksps with FCLK = 17*FSAMPLE
Parameter
Symbol
Min
Typ
Max
Units
Conditions
Power Requirements
Operating Voltage
Operating Current
VDD
IDD
4.5
—
5.5
V Note 9
—
300
450
µA VDD , VREF = 5V, DOUT unloaded
—
200
—
VDD, VREF = 2.7V, DOUT unloaded
Standby Current
Temperature Ranges
IDDS
—
0.05
1
µA CS = VDD = 5.0V
Specified Temperature Range
Operating Temperature Range
Storage Temperature Range
Thermal Package Resistance
TA
-40
—
+85
°C
TA
-40
—
+85
°C
TA
-65
—
+150
°C
Thermal Resistance, 8L-MSOP
JA
—
206
—
°C/W
Thermal Resistance, 8L-PDIP
JA
—
85
—
°C/W
Thermal Resistance, 8L-SOIC
JA
—
163
—
°C/W
Note 1: This specification is established by characterization and not 100% tested.
2: See characterization graphs that relate converter performance to VREF level.
3: VIN = 0.1V to 4.9V @ 1 kHz.
4: VDD = 5V DC ±500 mVP-P @ 1 kHz, see test circuit Figure 1-4.
5: Maximum clock frequency specification must be met.
6: VREF = 400 mV, VIN = 0.1V to 4.9V @ 1 kHz
7: MSOP devices are only specified at 25°C and +85°C.
8: For slow sample rates, see Section 5.2.1 “Maintaining Minimum Clock Speed” for limitations on clock frequency.
9: 4.5V - 5.5V is the supply voltage range for specified performance
.
tCSH
CS
CLK
tSUCS
DOUT
HI-Z
tHI tLO
tEN
tDO
tR
Null Bit
Sign Bit
tDIS
tF
LSB
HI-Z
FIGURE 1-1:
Timing Parameters.
2011 Microchip Technology Inc.
DS21700D-page 5