MIC860BC5 View Datasheet(PDF) - Micrel
Part Name
Description
Manufacturer
MIC860BC5 Datasheet PDF : 12 Pages
| |||
MIC860
Applications Information
Power Supply Bypassing
Regular supply bypassing techniques are recommended.
A 10µF capacitor in parallel with a 0.1µF capacitor on both
the positive and negative supplies are ideal. For best perfor-
mance all bypassing capacitors should be located as close
to the op amp as possible and all capacitors should be low
ESL (equivalent series inductance), ESR (equivalent series
resistance). Surface-mount ceramic capacitors are ideal.
Supply and Loading Considerations
The MIC860 is intended for single supply applications con-
figured with a grounded load. It is not advisable to operate
the MIC860 with either:
1). A grounded load and split supplies (+/-V) or
2). A single supply where the load is terminated above
ground.
Under the above conditions, if the load is less than 20kOhm
and the output swing is greater than 1V(peak), there may be
some instability when the output is sinking current.
Micrel, Inc.
February 2006
11
M9999-022706
Share Link: 