ML9090A View Datasheet(PDF) - Oki Electric Industry
Part Name
Description
Manufacturer
ML9090A Datasheet PDF : 41 Pages
| |||
FEDL9090A-01
1Semiconductor
ML9090A-01, -02
LCD Driver with Key Scanner and RAM
This version: May 2001
GENERAL DESCRIPTION
The ML9090A-01 and ML9090A-02 are LCD drivers that contain internal RAM and a key scan function. They are
best suited for car audio displays.
Since 1-bit data of the display data RAM corresponds to the light-on or light-off of 1-dot of the LCD panel (a bit
map system), a flexible display is possible.
A single chip can implement a graphic display system of a maximum of 80 × 18 dots (80 × 10 dots for the
ML9090A-01, 80 × 18 dots for the ML9090A-02).
Since containing voltage multipliers, the ML9090A-01 and ML9090A-02 require no power supply circuit to drive
the LCD.
Since the internal 5 × 5 scan circuit has eliminated the needs of key scanning by the CPU, the ports of the CPU can
be efficiently used.
FEATURES
• Logic voltage: 2.7 to 5.5 V
• LCD drive voltage: 6 to 16 V (positive voltage)
• 80 segment outputs, 10 common outputs for ML9090A-01 and 18 common outputs for ML9090A-02
• Built-in bit-mapped RAM (ML9090A-01: 80 × 10 = 800 bits, ML9090A-02: 80 × 18 = 1440 bits)
• 4-pin serial interface with CPU: CS, CP, DI/O, KREQ
• Built-in LCD drive bias resistors
• Built-in voltage doubler or tripler circuit
• Built-in 5 × 5 key scanner
• Port A output
: 1 pin, output current: –15 mA: (may be used for LED driving)
• Port B output
: 8 pins
Output current (available for the ML9090A-01 only)
–2 mA : 5 pins
–15 mA : 3 pins
• Temperature range: –40 to +85°C
• Package: 128-pin plastic QFP (QFP128-P-1420-0.50-K) (Product name: ML9090A-01GA)
(Product name: ML9090A-02GA)
Comparison between the ML9090A-01 and the ML9090A-02
Item
Number of common outputs
Number of dots on the LCD screen
(selectable by program)
Number of port A outputs
Number of port B outputs
ML9090A-01
10 Max.
8 × 80
9 × 80
10 × 80
1
8
ML9090A-02
18 Max.
16 × 80
17 × 80
18 × 80
1
—
1/41
Share Link: 