¡ Semiconductor
MSM9844
• Playback Operation When Micro-controller Interface in Use
(1) Define a synthesis algorithm, sampling frequency, bus width, playback mode, and etc. as required, by
using an appropriate command.
(2) To start playback, input the PLAY command. Or, write one word data to FIFO, letting the LSI ready for
playback, and turn the EMP pin to “L” to initiate playback.
(3) Status shifting indicated by the EMP and FUL pins
(EMP=”L”, MID=”L”, FUL=”L”)
Indicates the state where no one-word data is written to FIFO memory.
(EMP=”H”, MID=”L”, FUL=”L”)
Indicates the state where one-word or more data is written to FIFO memory.
(EMP=”L”, MID=”H”, FUL=”L”)
Indicates the state where data is written to more than half of FIFO memory.
(EMP=”L”, MID=”H”, FUL=”H”)
Indicates the state where FIFO memory is full.
(4) Ending playback
When a write cycle is not completed within pre-fixed time, the LSI deems it as a completed write cycle and
ends playback.
• FIFO Memory's Status Shift
: Empty Block
: Write Done Block
: Block Being Read
EMP=H
MID =L
FUL =L
EMP=L
MID =L
FUL =L
EMP=L
MID =H
FUL =L
EMP=L
MID =H
FUL =H
EMP=L
MID =L
FUL =L
EMP=L
MID =L
FUL =L
EMP=H
MID =L
FUL =L
Start Playback
Playing Back
End Playback
Page14