NCV8518A View Datasheet(PDF) - ON Semiconductor

Part Name

Description

Manufacturer

NCV8518A

Low Dropout Linear Regulator with Watchdog, Wake Up, RESET, and ENABLE

ON Semiconductor 

NCV8518A

ELECTRICAL CHARACTERISTICS (continued) (-40°C ≤ TJ ≤ 150°C; 6.0 V ≤ VIN ≤ 28 V, 100 mA ≤ IOUT ≤ 150 mA,

C2 = 1.0 mF, RDelay = 60 k; unless otherwise specified.)

Characteristic

Symbol

Min

Typ

Max

Wake Up Output (VIN = 14 V, IOUT = 5.0 mA)

Wake Up Period

(RDELAY = 60 k)

(RDELAY = 120 k)

(RDELAY = 500 k)

Wake Up Duty Cycle Nominal

-

18

25

32

-

50

-

-

208

-

-

45

50

55

RESET HIGH to Wake Up Rising Delay Time

(RDELAY = 60 k) 50% RESET Rising Edge to

50% Wake Up Edge (RDELAY = 120 k)

(RDELAY = 500 k)

Wake Up Response to Watchdog Input

50% WDI Falling Edge to

50% Wake Up Falling Edge

-

9.0

12.5

16

-

25

-

-

104

-

-

-

0.1

5.0

Wake Up Response to RESET

50% RESET Falling Edge to

50% Wake Up Falling Edge

(VOUT = 5.0 V→ 4.5 V)

Output Low (RLOAD = 10 k)

Output High (RLOAD = 10 k)

Delay

-

-

0.1

5.0

-

-

0.2

0.4

-

VOUT - 0.5 VOUT - 0.25

-

Output Voltage (RDELAY = 60 k, 120 k, 500 k)

-

-

0.48

-

Unit

ms

%

ms

ms

ms

V

V

V

DEFINITION OF TERMS

Dropout Voltage: The input-to-output voltage differential at which the circuit ceases to regulate against further reduction in

input voltage. Measured when the output voltage has dropped 100 mV from the nominal value obtained at 14 V input, dropout

voltage is dependent upon load current and junction temperature.

Input Voltage: The DC voltage applied to the input terminals with respect to ground.

Line Regulation: The change in output voltage for a change in the input voltage. The measurement is made under conditions

of low dissipation or by using pulse techniques such that the average chip temperature is not significantly affected.

Load Regulation: The change in output voltage for a change in load current at constant chip temperature.

Quiescent Current: The part of the positive input current that does not contribute to the positive load current. The regulator

ground lead current with no load.

Current Limit: Peak current that can be delivered to the output.

http://onsemi.com

6

Share Link: