SA615(1997) View Datasheet(PDF) - Philips Electronics
Part Name
Description
Manufacturer
SA615 Datasheet PDF : 14 Pages
| |||
Philips Semiconductors
High performance low power mixer FM IF system
Product specification
SA615
DESCRIPTION
The SA615 is a high performance monolithic low-power FM IF
system incorporating a mixer/oscillator, two limiting intermediate
frequency amplifiers, quadrature detector, muting, logarithmic
received signal strength indicator (RSSI), and voltage regulator. The
SA615 combines the functions of Signetics’ SA602 and SA604A, but
features a higher mixer input intercept point, higher IF bandwidth
(25MHz) and temperature compensated RSSI and limiters
permitting higher performance application. The SA615 is available in
20-lead dual-in-line plastic, 20-lead SOL (surface-mounted miniature
package) and 20-lead SSOP (shrink small outline package).
The SA605 and SA615 are functionally the same device types. The
difference between the two devices lies in the guaranteed
specifications. The SA615 has a higher ICC, lower input third order
intercept point, lower conversion mixer gain, lower limiter gain, lower
AM rejection, lower SINAD, higher THD, and higher RSSI error than
the SA615. Both the SA605 and SA615 devices will meet the EIA
specifications for AMPS and TACS cellular radio applications.
For additional technical information please refer to application notes
AN1994, 1995 and 1996, which include example application
diagrams, a complete overview of the product, and artwork for
reference.
FEATURES
• Low power consumption: 5.7mA typical at 6V
• Mixer input to >500MHz
• Mixer conversion power gain of 13dB at 45MHz
• Mixer noise figure of 4.6dB at 45MHz
• XTAL oscillator effective to 150MHz (L.C. oscillator to 1GHz local
oscillator can be injected)
• 102dB of IF Amp/Limiter gain
• 25MHz limiter small signal bandwidth
• Temperature compensated logarithmic Received Signal Strength
Indicator (RSSI) with a dynamic range in excess of 90dB
• Two audio outputs – muted and unmuted
• Low external component count; suitable for crystal/ceramic/LC
filters
• Excellent sensitivity: 0.22µV into 50Ω matching network for 12dB
SINAD (Signal to Noise and Distortion ratio) for 1kHz tone with RF
at 45MHz and IF at 455kHz
• SA615 meets cellular radio specifications
• ESD hardened
PIN CONFIGURATION
N, D and DK Packages
RFIN 1
RF BYPASS 2
XTAL OSC 3
XTAL OSC 4
MUTEIN 5
VCC 6
RSSIOUT 7
MUTED AUDIO OUT 8
UNMUTED AUDIO OUT 9
QUADRATURE IN 10
20 MIXER OUT
19 IF AMP DECOUPLING
18 IF AMP IN
17 IF AMP DECOUPLING
16 IF AMP OUT
15 GND
14 LIMITER IN
13 LIMITER DECOUPLING
12 LIMITER DECOUPLING
11 LIMITER OUT
NOTE:
See back page for package dimensions
Figure 1. Pin Configuration
SR00341
APPLICATIONS
• Cellular radio FM IF
• High performance communications receivers
• Single conversion VHF/UHF receivers
• SCA receivers
• RF level meter
• Spectrum analyzer
• Instrumentation
• FSK and ASK data receivers
• Log amps
• Wideband low current amplification
ORDERING INFORMATION
DESCRIPTION
20-Pin Plastic Dual In-Line Package (DIP)
20-Pin Plastic Small Outline Large (SOL) package
20-Pin Plastic Shrink Small Outline Package (SSOP)
TEMPERATURE RANGE
–40 to +85°C
–40 to +85°C
–40 to +85°C
ORDER CODE
SA615N
SA615D
SA615DK
DWG #
SOT146-1
SOT108-1
SOT266-1
1997 Nov 07
2
853-1402 18665
Share Link: 