P80CE598FFB View Datasheet(PDF) - Philips Electronics
Part Name
Description
Manufacturer
P80CE598FFB Datasheet PDF : 108 Pages
| |||
Philips Semiconductors
8-bit microcontroller with on-chip CAN
Product specification
P8xCE598
SYMBOL
PIN
DEFAULT
ALTERNATIVE
DESCRIPTION
Port 3
P3.0 to P3.7
RXD
TXD
INT0
INT1
T0
T1
WR
RD
41 to 48
41
42
43
44
45
46
47
48
8-bit quasi-bidirectional I/O port.
Serial Input Port.
Serial Output Port.
External interrupt input 0.
External interrupt input 1.
Timer 0 external input.
Timer 1 external input.
External Data Memory Write strobe.
External Data Memory Read strobe.
Port 2 (Sink/source: 1 × TTL = 4 × LSTTL inputs)
P2.0 to P2.7
55 to 62
A08 to A15
8-bit quasi-bidirectional I/O port.
High-order address byte for external memory.
Port 0 (Sink/source: 8 × LSTTL inputs)
P0.7 to P0.0
68 to 75
AD7 to AD0
8-bit open drain bidirectional I/O port.
Multiplexed Low-order address and Data bus for
external memory.
Port 5
P5.7 to P5.0
ADC7 to ADC0
5 to 12
8-bit input port.
8 input channels to ADC.
Notes
1. To avoid a ‘latch up’ effect at power-on: VSS − 0.5 V < ‘voltage on any pin at any time’ < VDD + 0.5 V.
2. If the CAN-controller is in the reset state (e.g. after a power-up reset; CAN Control Register bit CR.0; see
Section 13.5.3 Table 32, the CAN transmitter outputs are floating and the pins P1.6 and P1.7 can be used as
open-drain port pins. After a power-up reset the port data is HIGH, leaving the pins P1.6 and P1.7 floating.
1996 Jun 27
10
Share Link: 