ATMEGA103(1999) View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

ATMEGA103
(Rev.:1999)

8-bit Microcontroller with 64K/128K Bytes In-System Programmable Flash

Atmel Corporation 

A flexible interrupt module has its control registers in the I/O space with an additional global interrupt enable bit in the status

register. All the different interrupts have a separate interrupt vector in the interrupt vector table at the beginning of the

program memory. The different interrupts have priority in accordance with their interrupt vector position. The lower the

interrupt vector address, the higher the priority.

The memory spaces in the AVR architecture are all linear and regular memory maps.

General Purpose Register File

Figure 5 shows the structure of the 32 general purpose working registers in the CPU.

Figure 5. AVR CPU General Purpose Working Registers

7

0 Addr.

R0

$00

R1

$01

R2

$02

...

R13

$0D

General

R14

$0E

Purpose

R15

$0F

Working

R16

$10

Registers

R17

$11

...

R26

$1A

X-register low byte

R27

$1B

X-register high byte

R28

$1C

Y-register low byte

R29

$1D

Y-register high byte

R30

$1E

Z-register low byte

R31

$1F

Z-register high byte

All the register operating instructions in the instruction set have direct and single cycle access to all registers. The only

exception is the five constant arithmetic and logic instructions SBCI, SUBI, CPI, ANDI and ORI between a constant and a

register and the LDI instruction for load immediate constant data. These instructions apply to the second half of the regis-

ters in the register file - R16..R31. The general SBC, SUB, CP, AND and OR and all other operations between two registers

or on a single register apply to the entire register file.

As shown in Figure 5, each register is also assigned a data memory address, mapping them directly into the first 32

locations of the user Data Space. Although not being physically implemented as SRAM locations, this memory organization

provides great flexibility in access of the registers, as the X,Y and Z registers can be set to index any register in the file.

The 4K bytes of SRAM available for general data are implemented as addresses $0060 to $0FFF.

8

ATmega603/103

Share Link: