AT90LS8535-4MC View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

AT90LS8535-4MC

8-Bit AVR® Microcontroller with 4K/8K Bytes In-System Programmable Flash

Atmel Corporation 

General-purpose

Register File

AT90S/LS8535

memory. The different interrupts have priority in accordance with their interrupt vector

position. The lower the interrupt vector address, the higher the priority.

Figure 6 shows the structure of the 32 general-purpose working registers in the CPU.

Figure 6. AVR CPU General-purpose Working Registers

General

Purpose

Working

Registers

7

0 Addr.

R0

$00

R1

$01

R2

$02

…

R13

$0D

R14

$0E

R15

$0F

R16

$10

R17

$11

…

R26

$1A

X-register low byte

R27

$1B

X-register high byte

R28

$1C

Y-register low byte

R29

$1D

Y-register high byte

R30

$1E

Z-register low byte

R31

$1F

Z-register high byte

All the register operating instructions in the instruction set have direct and single-cycle

access to all registers. The only exception is the five constant arithmetic and logic

instructions SBCI, SUBI, CPI, ANDI and ORI between a constant and a register and the

LDI instruction for load immediate constant data. These instructions apply to the second

half of the registers in the register file (R16..R31). The general SBC, SUB, CP, AND,

and OR and all other operations between two registers or on a single register apply to

the entire register file.

As shown in Figure 6, each register is also assigned a data memory address, mapping

them directly into the first 32 locations of the user Data Space. Although not being phys-

ically implemented as SRAM locations, this memory organization provides great

flexibility in access of the registers, as the X-, Y-, and Z-registers can be set to index any

register in the file.

9

1041H–11/01

Share Link: