PIC10F200(2014) View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC10F200
(Rev.:2014)

6-Pin, 8-Bit Flash Microcontrollers

Microchip Technology 

PIC10F200/202/204/206

TABLE 3-2: PIC10F200/202/204/206 PINOUT DESCRIPTION

Name

Function

Input

Type

Output

Type

Description

GP0/ICSPDAT/CIN+

GP0

TTL CMOS Bidirectional I/O pin. Can be software programmed for internal

weak pull-up and wake-up from Sleep on pin change.

ICSPDAT ST CMOS In-Circuit Serial Programming™ data pin.

CIN+

AN

— Comparator input (PIC10F204/206 only).

GP1/ICSPCLK/CIN-

GP1

TTL CMOS Bidirectional I/O pin. Can be software programmed for internal

weak pull-up and wake-up from Sleep on pin change.

ICSPCLK ST CMOS In-Circuit Serial Programming clock pin.

CIN-

AN

— Comparator input (PIC10F204/206 only).

GP2/T0CKI/COUT/

FOSC4

GP2

T0CKI

TTL CMOS Bidirectional I/O pin.

ST

— Clock input to TMR0.

COUT

— CMOS Comparator output (PIC10F204/206 only).

FOSC4 — CMOS Oscillator/4 output.

GP3/MCLR/VPP

GP3

TTL

— Input pin. Can be software programmed for internal weak

pull-up and wake-up from Sleep on pin change.

MCLR ST

— Master Clear (Reset). When configured as MCLR, this pin is

an active-low Reset to the device. Voltage on GP3/MCLR/VPP

must not exceed VDD during normal device operation or the

device will enter Programming mode. Weak pull-up always on

if configured as MCLR.

VPP

HV

— Programming voltage input.

VDD

VDD

P

— Positive supply for logic and I/O pins.

VSS

VSS

P

— Ground reference for logic and I/O pins.

Legend: I = Input, O = Output, I/O = Input/Output, P = Power, — = Not used, TTL = TTL input,

ST = Schmitt Trigger input, AN = Analog input

 2004-2014 Microchip Technology Inc.

DS40001239F-page 9

Share Link: