PIC16F1936 View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16F1936

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt XLP™ Technology

Microchip Technology 

PIC16F193X/LF193X

28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with

LCD Driver with nano Watt XLPTM Technology

Devices Included In This Data Sheet:

PIC16F193X Devices:

• PIC16F1933

• PIC16F1936

• PIC16F1938

• PIC16F1934

• PIC16F1937

• PIC16F1939

PIC16LF193X Devices:

• PIC16LF1933

• PIC16LF1936

• PIC16LF1938

• PIC16LF1934

• PIC16LF1937

• PIC16LF1939

High-Performance RISC CPU:

• Only 49 Instructions to Learn:

- All single-cycle instructions except branches

• Operating Speed:

- DC – 32 MHz oscillator/clock input

- DC – 125 ns instruction cycle

• Up to 16K x 14 Words of Flash Program Memory

• Up to 1024 Bytes of Data Memory (RAM)

• Interrupt Capability with automatic context saving

• 16-Level Deep Hardware Stack

• Direct, Indirect and Relative Addressing modes

• Processor Read Access to Program Memory

• Pinout Compatible to other 28/40-pin PIC16CXXX

and PIC16FXXX Microcontrollers

Special Microcontroller Features:

• Precision Internal Oscillator:

- Factory calibrated to ±1%, typical

- Software selectable frequency range from

32 MHz to 31 kHz

• Power-Saving Sleep mode

• Power-on Reset (POR)

• Power-up Timer (PWRT) and Oscillator Start-up

Timer (OST)

• Brown-out Reset (BOR)

- Selectable between two trip points

- Disable in Sleep option

• Multiplexed Master Clear with Pull-up/Input Pin

• Programmable Code Protection

• High Endurance Flash/EEPROM cell:

- 100,000 write Flash endurance

- 1,000,000 write EEPROM endurance

- Flash/Data EEPROM retention: > 40 years

• Wide Operating Voltage Range:

- 1.8V-5.5V (PIC16F193X)

- 1.8V-3.6V (PIC16LF193X)

PIC16LF193X Low-Power Features:

• Standby Current:

- 60 nA @ 1.8V, typical

• Operating Current:

- 7.0 μA @ 32 kHz, 1.8V, typical

- 150 μA @ 1 MHz, 1.8V, typical

• Timer1 Oscillator Current:

- 600 nA @ 32 kHz, 1.8V, typical

• Low-Power Watchdog Timer Current:

- 500 nA @ 1.8V, typical

Peripheral Features:

• Up to 35 I/O Pins and 1 Input-only pin:

- High-current source/sink for direct LED drive

- Individually programmable Interrupt-on-pin

change pins

- Individually programmable weak pull-ups

• Integrated LCD Controller:

- Up to 96 segments

- Variable clock input

- Contrast control

- Internal voltage reference selections

• Capacitive Sensing Module (mTouchTM)

- Up to 16 selectable channels

• A/D Converter:

- 10-bit resolution and up to 14 channels

- Selectable 1.024/2.048/4.096V voltage

reference

• Timer0: 8-Bit Timer/Counter with 8-Bit

Programmable Prescaler

• Enhanced Timer1

- Dedicated low-power 32 kHz oscillator driver

- 16-bit timer/counter with prescaler

- External Gate Input mode with toggle and

single shot modes

- Interrupt-on-gate completion

• Timer2, 4, 6: 8-Bit Timer/Counter with 8-Bit Period

Register, Prescaler and Postscaler

• Two Capture, Compare, PWM Modules (CCP)

- 16-bit Capture, max. resolution 125 ns

- 16-bit Compare, max. resolution 125 ns

- 10-bit PWM, max. frequency 31.25 kHz

• Three Enhanced Capture, Compare, PWM

modules (ECCP)

- 3 PWM time-base options

- Auto-shutdown and auto-restart

- PWM steering

- Programmable Dead-band Delay

© 2009 Microchip Technology Inc.

Preliminary

DS41364B-page 1

Share Link: