RT9013A View Datasheet(PDF) - Richtek Technology

Part Name

Description

Manufacturer

RT9013A

120mA, Low Dropout, Low Noise Ultra-Fast Without Bypass Capacitor CMOS LDO Regulator

Richtek Technology 

RT9013A

Parameter

Thermal Shutdown Temperature

Thermal Shutdown Hysteresis

Symbol

TSD

ΔTSD

Test Conditions

Min Typ Max Unit

-- 170 --

°C

--

30

--

Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for

stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational

sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may

remain possibility to affect device reliability.

Note 2. θJA is measured in the natural convection at TA = 25°C on a low effective thermal conductivity test board of JEDEC 51-3

thermal measurement standard.

Note 3. Devices are ESD sensitive. Handling precaution is recommended.

Note 4. The device is not guaranteed to function outside its operating conditions.

Note 5. Quiescent, or ground current, is the difference between input and output currents. It is defined by IQ = IIN - IOUT under no

load condition (IOUT = 0mA). The total current drawn from the supply is the sum of the load current plus the ground pin

current.

Note 6. The dropout voltage is defined as VIN -VOUT, which is measured when VOUT is VOUT(NORMAL) - 100mV.

Note 7. Regulation is measured at constant junction temperature by using a 2ms current pulse. Devices are tested for load

regulation in the load range from 10mA to 120mA.

www.richtek.com

4

DS9013A-02 April 2011

Share Link: