SCS152
3.2 RESET
The RESET command sets the internal state of the
device as follows:
1. The internal address counter is set to ‘0’.
2. The internal test modes are cleared.
3. The result of the last compared transport code is
cleared.
Figure 3-1 shows the RESET command following the
application of power.
FIGURE 3-1: POWER ON AND RESET
VDD
SCI
SCK
SDIO
TPOR
TOX
TR
TOX TD1
IOMAP(0)
DS40150B-page 6
Preliminary
© 1997 Microchip Technology Inc.