SI3060 View Datasheet(PDF) - Unspecified
Part Name
Description
Manufacturer
SI3060 Datasheet PDF : 62 Pages
| |||
Si306x
4. Bill of Materials
Component(s)
C1, C21
Value
33 pF, Y2, X7R, ±20%
Supplier(s)
Panasonic, Murata, Vishay
C3
10 nF, 250 V, X7R, ±20%
Venkel, SMEC
C4
1.0 µF, 50 V, Elec/Tant, ±20%
Panasonic
C5, C6
0.1 µF, 16 V, X7R, ±20%
Venkel, SMEC
C7
2.7 nF, 50 V, X7R, ±20%
Venkel, SMEC
C8, C9
680 pF, Y2, X7R, ±10%
Panasonic, Murata, Vishay
C10
C30, C315
D1, D22
0.01 µF, 16 V, X7R, ±20%
Not installed, 120 pF, 250 V, X7R, ±10%
Dual Diode, 225 mA, 300 V, CMPD2004
Venkel, SMEC
Venkel, SMEC
Central Semiconductor
FB1, FB2
Ferrite Bead, BLM18AG601SN1
Murata
Q1, Q3
NPN, 300 V, MMBTA42
Central Semiconductor, OnSemi, Fairchild
Q2
PNP, 300 V, MMBTA92
Central Semiconductor, OnSemi, Fairchild
Q4, Q5
NPN, 60 V, 330 mW, MMBTA06
Central Semiconductor, OnSemi, Fairchild
RV1
Sidactor, 275 V, 100 A
Teccor, ST Micro, Diodes Inc., Shindengen
R1
1.07 kΩ, 1/2 W, 1%
Venkel, SMEC, Panasonic
R2
150 Ω, 1/16 W, 5%
Venkel, SMEC, Panasonic
R3
3.65 kΩ, 1/2 W, 1%
Venkel, SMEC, Panasonic
R4
2.49 kΩ, 1/2 W, 1%
Venkel, SMEC, Panasonic
R5, R6
100 kΩ, 1/16 W, 5%
Venkel, SMEC, Panasonic
R7, R8
20 MΩ, 1/16 W, 5%
Venkel, SMEC, Panasonic
R9
1 MΩ, 1/16 W, 1%
Venkel, SMEC, Panasonic
R10
536 Ω, 1/4 W, 1%
Venkel, SMEC, Panasonic
R11
R12, R133
R15, R164
R30, R325
R31, R335
73.2 Ω, 1/2 W, 1%
56.2 Ω, 1/16 W, 5%
0 Ω, 1/16 W, 5%
Not installed, 15 MΩ, 1/8 W, 5%
Not installed, 5.1 MΩ, 1/8 W, 5%
Venkel, SMEC, Panasonic
Venkel, SMEC, Panasonic
Venkel, SMEC, Panasonic
Venkel, SMEC, Panasonic
Venkel, SMEC, Panasonic
U1
SiLabs Integrated System-Side Interface
Silicon Labs
U2
Si306x line-side device
Silicon Labs
Z1
Zener Diode, 43 V, 1/2 W
General Semi, Diodes Inc.,OnSemi
Notes:
1. X2/Y3 or Y2 rated capacitors can be used to comply with Nordic supplemental insulation requirements. Additional
vendors for these safety-rated capacitors include Novacap, Syfer, and Kyocera.
2. Several diode bridge configurations are acceptable. Parts, such as a single DF-04S or four 1N4004 diodes, may be
used.
3. 56 Ω, 1/16 W, 1% resistors may be substituted for R12-R13 (0 Ω) to decrease emissions.
4. Murata BLM18AG601SN1 may be substituted for R15-R16 (0 Ω) to decrease emissions.
5. C30-C31 and R30-R33 can be substituted for R7-R8 to implement the enhanced caller ID circuit.
10
Preliminary Rev. 0.9
Share Link: 