SI4012-A0-GT View Datasheet(PDF) - Silicon Laboratories
Part Name
Description
Manufacturer
SI4012-A0-GT Datasheet PDF : 16 Pages
| |||
Si4012
1. Electrical Specifications
Table 1. DC Characteristics1
Parameter
Symbol
Conditions
Min Typ Max Units
Supply Voltage Range VDD
1.8 — 3.6 V
Power Saving Modes IShutdown
Lowest current mode
— 100 — nA
IIdle
Register values retained, lowest current consumption idle — 700 — nA
mode
TUNE Mode Current
ITune Register values retained, LCOSC on fastest response to TX — 5
mode
— mA
TX Mode Current @
10 dBm
ITX_OOK
ITX_FSK
OOK, Manchester encoded
FSK
— 14.2 — mA
— 19.8 — mA
Notes:
1. All specification guaranteed by production test unless otherwise noted. Production test conditions and max limits are
listed in the "Production Test Conditions" section on page 9.
2. Guaranteed by qualification. Qualification test conditions are listed in the "Production Test Conditions" section on
page 9.
Table 2. Absolute Maximum Ratings1,2
Parameter
Symbol
Value
Unit
Supply Voltage
Input Current3
Input Voltage4
VDD
–0.5 to 3.9
V
IIN
10
mA
VIN
–0.3 to (VDD + 0.3)
V
Junction Temperature
TOP
–40 to 90
C
Storage Temperature
TSTG
–55 to 125
C
Notes:
1. Permanent device damage may occur if the absolute maximum ratings are exceeded. Functional operation should be
restricted to the conditions as specified in the operational sections of this data sheet. Exposure beyond recommended
operating conditions for extended periods may affect device reliability.
2. Handling and assembly of these devices should only be done at ESD-protected workstations.
3. All input pins besides VDD.
4. For GPIO pins configured as inputs.
4
Rev 0.1
Share Link: 