SMDA05CN-5TE View Datasheet(PDF) - Semtech Corporation
Part Name
Description
Manufacturer
SMDA05CN-5TE Datasheet PDF : 6 Pages
| |||
SMDA05CN-5 THRU SMDA15CN-5
PROTECTION PRODUCTS
Applications Information
Device Connection Options for Protection of Four or
Five Data Lines
The SMDAxxCN-5 can be configured to protect either
four or five bidirectional data lines. The options for
connecting the devices are as follows:
1. Bidirectional protection of four I/O lines is achieved
by connecting pins 1, 2, 3, and 4 to the data lines.
Pins 5, 6, 7, and 8 are connected to ground. The
ground connection should be made directly to the
ground plane for best results. The path length is
kept as short as possible to reduce the effects of
parasitic inductance in the board traces. In this
configuration, the device can withstand the maxi-
mum specified transient impulse on four lines
simultaneously.
2. Bidirectional protection of five I/O lines is achieved
by connecting pins 1, 2, 3, 4, and 5 to the data
lines. Pins 6, 7, and 8 are connected to ground.
The ground connection should be made directly to
the circuit board ground plane for best results. In
this configuration, the device can withstand the
maximum rated transient impulse on any two lines
simultaneously.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
l Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
l Minimize the path length between the TVS and the
protected line.
l Minimize all conductive loops including power and
ground loops.
l The ESD transient return path to ground should be
kept as short as possible.
l Never run critical signals near board edges.
l Use ground planes whenever possible.
Protection for Four Bidirectional Lines
From Connector
To Protected IC
Protection for Five Bidirectional Lines
From Connector
To Protected IC
ã 2000 Semtech Corp.
4
www.semtech.com
Share Link: 