SMT05E-12V View Datasheet(PDF) - Artesyn Technologies
Part Name
Description
Manufacturer
SMT05E-12V Datasheet PDF : 12 Pages
| |||
Note 1
Thermal reference is defined as the highest temperature
measured at any one of the specified thermal reference points.
Note 2
The Remote ON/OFF pin is referenced to ground.
Note 3
The SMT05E-12 features an ‘Active High’ Remote ON/OFF
operation. If not using the Remote ON/OFF pin, leave the pin
open (the converter will be on). The Remote ON/OFF pin is
referenced to ground.
The following conditions apply for the SMT05E:
Configuration
Converter Operation
Remote pin open circuit
Unit is ON
Remote pin pulled low [Von/off <.8V] Unit is OFF
Remote pin pulled high [Von/off >1.6V] Unit is ON
An ‘Active Low’ Remote ON/OFF version is also possible
with this converter. Please consult the factory for details.
Note 4
Thermal reference set up: Unit mounted on an edge card test
board 203mm x 190mm. Test board mounted vertically. For test
details and recommended set-up see Application Note 144.
Note 5
Max 60ºC for full load in still air. See Application Note 144 for a
detailed thermal derating.
CAUTION: Hazardous internal voltages and high temperatures.
Ensure that unit is accessible only to trained personnel. The user
must provide the recommended fusing in order to comply with
safety approvals.
SMT05E Series | 5 A DC-DC Converters
E Class Non-Isolated
11
www.artesyn.com
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
Share Link: 