SO-720-LPD-HBA-704.3806 View Datasheet(PDF) - Vectron International
Part Name
Description
Manufacturer
SO-720-LPD-HBA-704.3806 Datasheet PDF : 7 Pages
| |||
SO-720 SAW Clock Oscillator
Electrical Performance
Parameter
Frequency
Nominal Frequency
Frequency Stability (Ordering Option)
Aging
Symbol Minimum Typical Maximum Units Notes
fN
fSTAB
150
800
±50, ±100
10
MHz 1,2
ppm 1,2
ppm 6,8
Supply
Voltage
Current (No Load)
Outputs
Mid Level - LVPECL
Swing – LVPECL
Mid Level - LVDS
Swing – LVDS
Current
Rise Time
Fall Time
Symmetry
Jitter (12 kHz – 20 MHz BW) 622.08 MHz
Jitter (50 kHz – 80 MHz BW) 622.08 MHz
Period Jitter, RMS (622.08 MHz)
Period Jitter, Peak - Peak (622.08 MHz)
Operating Temp. (Ordering Option)
Package Size
VCC
ICC
IOUT
tR
tF
SYM
φJ
φJ
φJ
φJ
TOP
2.97
3.3
3.63
V
2,3
55
70
mA
3
Vcc-1.4 Vcc-1.25 Vcc-1.0
V
2,3
450
600
750 mV-pp 2,3
VCC-2.4 Vcc-2.3 VCC-2.5
V
2,3
250
350
450 mV-pp 2,3
20
mA
6
500
ps
5,6
500
ps
5,6
45
50
55
%
2,3
0.100
0.250 ps-rms 6,7
0.120
0.300 ps-rms 6,7
2.5
3.0
ps-rms 9
16
24 ps pk-pk 9
0/70,-20/70 or -40/85
°C
1
5.0 x 7.5 x 2.0
mm
1. See Standard Frequencies and Ordering Information (Pg 7).
2. Parameters are tested with production test circuit below (Fig 1).
3. Parameters are tested at ambient temperature with test limits guard-banded for specified operating temperature.
4. Measured as the maximum deviation from the best straight-line fit, per MIL-0-55310.
5. Measured from 20% to 80% of a full output swing (Fig 2).
6. Not tested in production, guaranteed by design, verified at qualification.
7. Integrated across stated bandwidth per GR-253-CORE Issue3.
8. Aging Rate for 10 years (Aging is not part of overall frequency stability budget unless specified at time of order)
9. Broadband Period Jitter measured using Lecroy Wavemaster 8600A 6 GHz Oscilloscope, 250K samples taken.
Enable, Disable
(-1.3V, +2.0V)
1
No connect
2
(-1.3V)
3
(+2.0V)
6
COutput
5
Output
4
50Ω
50Ω
tR
80%
20%
Test Circuit Notes:
1) To Permit 50Ω Measurement of Outputs, all DC Inputs are Biased Down 1.3V.
2) All Voltage Sources Contain Bypass Capacitors to Minimize Supply Noise.
3) 50Ω Terminations are Within Test Equipment.
tF
tA
tB
SYM = 100 x tA / tB
Vcc - 1.0V
Vcc - 1.3V
Vcc - 1.6V
Figure 1. Test Circuit
Figure 2. 10K LV-PECL Waveform
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Page 2 of 7
Tel: 1-88-VECTRON-1
Website: www.vectron.com
Rev: 21 Jun 2006
Share Link: 