ST7-STICK45 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
ST7-STICK45
STMicroelectronics
ST7-STICK45 Datasheet PDF : 124 Pages
| |||
ST7LITE0xY0, ST7LITESxY0
PIN DESCRIPTION (Cont’d)
Legend / Abbreviations for Table 1:
Type:
I = input, O = output, S = supply
In/Output level: C= CMOS 0.15VDD/0.85VDD with input trigger
CT= CMOS 0.3VDD/0.7VDD with input trigger
Output level: HS = 20mA high sink (on N-buffer only)
Port and control configuration:
– Input:
float = floating, wpu = weak pull-up, int = interrupt 1), ana = analog
– Output: OD = open drain, PP = push-pull
Table 1. Device Pin Description
Pin n°
Pin Name
Level
Port / Control
Input
Output Main
Function
(after reset)
Alternate Function
18 1 VSS
19 2 VDD
1 3 RESET
20 4 PB0/AIN0/SS
S
S
I/O CT
I/O CT
X
X ei3
6 5 PB1/AIN1/SCK I/O CT X X
5 6 PB2/AIN2/MISO I/O CT
7 7 PB3/AIN3/MOSI I/O CT
8 8 PB4/AIN4/CLKIN I/O CT
9 9 PA7
I/O CT
XX
X ei2
XX
X ei1
10
10
PA6 /MCO/
ICCCLK
I/O CT X X
11
11
PA5/
ICCDATA
12 12 PA4
14 13 PA3
I/O CT HS X X
I/O CT HS X X
I/O CT HS X X
Ground
Main power supply
X
Top priority non maskable interrupt (active low)
X X X Port B0
X X X Port B1
X X X Port B2
X X X Port B3
X X X Port B4
ADC Analog Input 0 or SPI Slave
Select (active low)
ADC Analog Input 1 or SPI Clock
Caution: No negative current in-
jection allowed on this pin. For
details, refer to section 13.2.2 on
page 82
ADC Analog Input 2 or SPI Mas-
ter In/ Slave Out Data
ADC Analog Input 3 or SPI Mas-
ter Out / Slave In Data
ADC Analog Input 4 or External
clock input
X X Port A7
X X Port A6
Main Clock Output/In Circuit
Communication Clock.
Caution: During normal opera-
tion this pin must be pulled- up,
internally or externally (external
pull-up of 10k mandatory in noisy
environment). This is to avoid en-
tering ICC mode unexpectedly
during a reset. In the application,
even if the pin is configured as
output, any reset will put it back in
input pull-up
X X Port A5 In Circuit Communication Data
X X Port A4
X X Port A3
7/124
1
Share Link: