TDA8929 View Datasheet(PDF) - Philips Electronics

Part Name

Description

Manufacturer

TDA8929

Controller class-D audio amplifier

Philips Electronics 

Philips Semiconductors

Controller class-D audio amplifier

Preliminary specification

TDA8929T

1 FEATURES

• Operating voltage from ±15 to ±30 V

• Very low quiescent current

• Low distortion

• Fixed gain of 30 dB Single-Ended (SE) or 36 dB

Bridge-Tied Load (BTL)

• Good ripple rejection

• Internal switching frequency can be overruled by an

external clock

• No switch-on or switch-off plop noise

• Diagnostic input for short-circuit and temperature

protection

• Usable as a stereo Single-Ended (SE) amplifier or as a

mono amplifier in Bridge-Tied Load (BTL)

• Start-up safety test, to protect for short-circuits at the

output of the power stage to supply lines

• Electrostatic discharge protection (pin to pin).

3 GENERAL DESCRIPTION

The TDA8929T is the controller of a two-chip set for a high

efficiency class-D audio power amplifier system. The

system is divided into two chips:

• TDA8929T; the analog controller chip in a SO24

package

• TDA8926J/ST/TH or TDA8927J/ST/TH; a digital power

stage in a DBS17P, RDBS17P or HSOP24 power

package.

With this chip set a compact 2 × 50 W or 2 × 100 W audio

amplifier system can be built, operating with high efficiency

and very low dissipation. No heatsink is required, or

depending on supply voltage and load, a very small one.

The system operates over a wide supply voltage range

from ±15 up to ±30 V and consumes a very low quiescent

current.

2 APPLICATIONS

• Television sets

• Home-sound sets

• Multimedia systems

• All mains fed audio systems

• Car audio (boosters).

4 ORDERING INFORMATION

TYPE NUMBER

TDA8929T

NAME

SO24

PACKAGE

DESCRIPTION

plastic small outline package; 24 leads; body width 7.5 mm

VERSION

SOT137-1

2001 Dec 11

3

Share Link: