TDA8787 View Datasheet(PDF) - Philips Electronics
Part Name
Description
Manufacturer
TDA8787 Datasheet PDF : 20 Pages
| |||
Philips Semiconductors
10-bit, 3.0 V analog-to-digital interface for
CCD cameras
Preliminary specification
TDA8787
FEATURES
• Correlated Double Sampling (CDS), Automatic Gain
Control (AGC), 10-bit Analog-to-Digital Converter (ADC)
and reference regulator included
• Fully programmable via a 3-wire serial interface
• Sampling frequency up to 18 MHz
• AGC gain range of 36 dB (in steps of 0.1 dB)
• Low power consumption of only 190 mW (typ.)
• Power consumption in standby mode of 4.5 mW (typ.)
• 3.0 V operation and 2.5 to 3.6 V operation for the digital
outputs
• Active control pulses polarity selectable via serial
interface
• 8-bit DAC included for analog settings
• TTL compatible inputs, CMOS compatible outputs.
APPLICATIONS
• Low-power, low-voltage CCD camera systems.
GENERAL DESCRIPTION
The TDA8787 is a 10-bit analog-to-digital interface for
CCD cameras. The device includes a correlated double
sampling circuit, AGC and a low-power 10-bit ADC
together with its reference voltage regulator.
AGC gain is controlled via the serial interface.
The ADC input clamp level is controlled via the serial
interface.
An additional DAC is provided for additional system
controls; its output voltage range is 1.0 V (p-p) which is
available at pin OFDOUT.
QUICK REFERENCE DATA
SYMBOL
VCCA
VCCD
VCCO
ICCA
ICCD
ICCO
PARAMETER
analog supply voltage
digital supply voltage
digital outputs supply voltage
analog supply current
digital supply current
digital outputs supply current
ADCres
Vi(CDS)(p-p)
fpix(max)
fpix(min)
DRAGC
Ntot(rms)
Ptot
ADC resolution
maximum CDS input voltage
(peak-to-peak value)
maximum pixel rate
minimum pixel rate
AGC dynamic range
total noise from CDS input to
ADC output
total power consumption
CONDITIONS
MIN.
2.7
2.7
2.5
all clamps active
−
−
fpix = 18 MHz; CL = 20 pF;
−
input ramp response time is 800 µs
−
VCC = 2.85 V
650
VCC ≥ 3.0 V
800
18
5
−
AGC gain = 0 dB; see Fig.8
−
TYP.
3.0
3.0
2.6
55
8
1
10
−
−
−
−
36
0.25
MAX. UNIT
3.6 V
3.6 V
3.6 V
70
mA
11
mA
2
mA
−
bits
−
mV
−
mV
−
MHz
−
MHz
−
dB
−
LSB
VCCA = VCCD = VCCO = 3 V
−
190 −
mW
ORDERING INFORMATION
TYPE
NUMBER
TDA8787HL
NAME
LQFP48
PACKAGE
DESCRIPTION
plastic low profile quad flat package; 48 leads; body 7 × 7 × 1.4 mm
VERSION
SOT313-2
1998 Oct 15
2
Share Link: 