TDK 5111
Reference
Table 5-4 Supply Voltage VS = 2.1 V ... 4.0 V, Ambient temperature Tamb = -40°C ... +125°C
Parameter
Symbol
Limit Values
Unit Test Conditions
Min
Typ
Max
Power Amplifier Output (Pin 14)
Output Power 1) at 315 MHz POUT, 315
5.9
transformed to 50 Ohm.
POUT, 315
7.7
7.5
8.7
dBm VS = 2.1 V
10.4
12.4 dBm VS = 3.0 V
VFSEL = 0 V
POUT, 315
8.4
11.7
14.2 dBm VS = 4.0 V
Frequency Range Selection (Pin 15)
Transmit frequency 315 MHz VFSEL
0
0.5
V
Input bias current FSEL
IFSEL
35
µA
VFSEL = VS
Input bias current FSEL
IFSEL
-20
µA
VFSEL = 0 V
Crystal Frequency Selection (Pin 16)
Crystal frequency 9.84 MHz VCSEL
V
pin open
Input bias current CSEL
ICSEL
55
µA
VCSEL = VS
Input bias current CSEL
ICSEL
-25
µA
VCSEL = 0 V
1) Matching circuitry as used in the 50 Ohm-Output Testboard.
Range @ 2.1 V, +25°C: 7.5 dBm +/- 1 dBm
Typ. temperature dependency at 2.1 V: +0.2 dBm@-40°C and -0.6 dBm@+125°C, reference +25°C
Range @ 3.0 V, +25°C: 10.4 dBm +/- 2.0 dBm
Typ. temperature dependency at 3.0 V: -0.2 dBm@-40°C and -0.7 dBm@+125°C, reference +25°C.
Range @ 4.0 V, +25°C: 11.7 dBm +/- 2.5 dBm
Typ. temperature dependency at 4.0 V: -0.8 dBm@-40°C and -0.6 dBm@+125°C, reference +25°C.
Tolerances of the passive elements not taken into account.
A smaller load impedance reduces the supply-voltage dependency.
A higher load impedance reduces the temperature dependency.
Wireless Components
5-8
Specification, October 2002