TLP118TPL View Datasheet(PDF) - Toshiba
Part Name
Description
Manufacturer
TLP118TPL Datasheet PDF : 13 Pages
| |||
TLP118
Switching Characteristics
(Unless otherwise specified, Ta=-40 to 125 °C､VCC=4.5 to 5.5V)
CHARACTERISTIC
TEST
SYMBOL CIRCUIT
CONDITION
MIN TYP. MAX UNIT
Propagation delay time (H→L)
Propagation delay time (L→H)
tpHL
tpLH
IF=0→7.5 mA RL=350Ω
CL=15pF
IF=7.5→0 mA (Note 4)
-
30
60
ns
-
30
60
ns
Switching Time Dispersion
between ON and OFF
Propagation Delay Skew (Note 5)
Fall Time (90 – 10 %)
|tpHL-
tpLH|
tpsk
tf
Rise Time (10 – 90 %)
tr
RL=350Ω,
5
IF=0↔7.5 mA CL=15pF
(Note 4)
IF=0→7.5 mA
IF=7.5→0 mA
RL=350Ω
CL=15pF
(Note 4)
-
-
30
ns
-40
-
40
ns
-
30
-
ns
-
30
-
ns
Common Mode transient
Immunity at High Level Output
Common Mode transient
Immunity at Low Level Output
CMH
CML
VCM=1000 Vp-p , IF=0 mA,
VCC=5 V , Ta=25°C
15
-
6
VCM=1000 Vp-p , IF=10 mA,
VCC=5 V , Ta=25°C
-15
-
- kV/μs
- kV/μs
*All typical values are at Ta=25°C
Note 3: A ceramic capacitor (0.1 μF) should be connected from pin 6 (VCC) to pin 4 (GND) to stabilize the operation
of the high gain linear amplifier. Failure to provide the bypass may impair the switching property.
The total lead length between capacitor and coupler should not exceed 1 cm.
Note 4: f=5MHz, duty=50%, input current tr=tf=5ns,
CL is approximately 15pF which includes probe and Jig/stray wiring capacitance.
Note 5: Propagation delay skew is defined as the difference between the largest and smallest propagation delay
times (i.e. tpHL or tpLH) of multiple samples. Evaluations of these samples are conducted under identical
test conditions (supply voltage, input current, temperature, etc).
TEST CIRCUIT 1: IOH Test Circuit
TEST CIRCUIT 2: VOL Test Circuit
VF
SHIELD
0.1μF
IOH
A
VO
VCC
IF
SHIELD
0.1μF
VOL IO VCC
V↑
TEST CIRCUIT 3: ICCL Test Circuit
ICCL
A
TEST CIRCUIT 4: ICCH Test Circuit
ICCH
A
IF
SHIELD
0.1 μF
VCC
SHIELD
0.1 μF
VCC
4
2010-03-02
Share Link: 