TS2012FC View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
TS2012FC Datasheet PDF : 31 Pages
| |||
TS2012FC
Absolute maximum ratings and operating conditions
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
Vin
Toper
Tstg
Tj
Rthja
Pd
ESD
Supply voltage (1)
Input voltage (2)
Operating free air temperature range
Storage temperature
Maximum junction temperature
Thermal resistance junction to ambient (3)
Power dissipation
HBM: human body model(5)
MM: machine model(6)
6
GND to VCC
-40 to + 85
-65 to +150
150
200
Internally limited(4)
2
200
V
V
°C
°C
°C
°C/W
kV
V
Latch-up Latch-up immunity
200
mA
VSTBY Standby pin maximum voltage
GND to VCC
V
Lead temperature (soldering, 10sec)
Output short circuit protection(7)
260
°C
1. All voltage values are measured with respect to the ground pin.
2. The magnitude of the input signal must never exceed VCC + 0.3V / GND - 0.3V.
3. The device is protected in case of over temperature by a thermal shutdown active @ 150°C.
4. Exceeding the power derating curves during a long period will cause abnormal operation.
5. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
6. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two
pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin
combinations with other pins floating.
7. Implemented short-circuit protection protects the amplifier against damage by short-circuit between
positive and negative outputs of each channel and between outputs and ground.
3/31
Share Link: 